BenQ HT8050 User Manual page 37

Indicators
Light
Status & Description
Power events
Stand-by mode
Powering up
Normal operation
Normal power-down cooling
Download
CW start fail
Scaler shutdown fail (data abort)
Scaler reset fail (video projector only)
LAN download fail
LAN download processing
Burn-in ON
Burn-in OFF
Lamp events
Lamp1 error in normal operation
Lamp is not lit up
Thermal events
Fan 1 error (the actual fan speed is ±25% outside the
desired speed)
Fan 2 error (the actual fan speed is ±25% outside the
desired speed)
Fan 3 error (the actual fan speed is ±25% outside the
desired speed)
Fan 4 error (the actual fan speed is ±25% outside the
desired speed)
Fan 5 error (the actual fan speed is ±25% outside the
desired speed)
Fan 6 error (the actual fan speed is ±25% outside the
desired speed)
Fan 7 error (the actual fan speed is ±25% outside the
desired speed)
Fan 8 error (the actual fan speed is ±25% outside the
desired speed)
Temperature 1 error (over limited temperature)
Thermal sensor 1 open error
Thermal sensor 1 short error
Thermal IC#1 I2C connection error
Maintenance 37