Operating Instructions - Carex Risedale User Manual

Table of Contents

Advertisement

Operating Instructions

After you set up your Risedale, position it in such a way that no one
will trip over the cord, and plug it in the power outlet.
in any way.
Note: The Power Lever will work on your right or left hand side.
When reattaching the lever, press it firmly onto the metal finger.
Warning: Do not install both Power Levers at the same time.
Caution: To retrieve an object that has fallen under the cushion,
first raise the seat cushion up, then unplug the power cord, and
reach under the cushion from either side to retrieve the object.
RISEDALE USER GUIDE
Now, sit in the Risedale. If your feet
are not comfortably flat on the floor,
you may need to remove the 1.5 inch
leg extensions (see Assembly
Instructions page 5).
Next, push and hold the Power Lever
with your thumb to rise from the
seated position.
Hold on to the arms of the chair.
To descend to the seated position, pull
and hold the Power Lever with your
index finger. Again, hold on to the
arms of the Risedale.
Note: To reduce the risk of electric
shock, you will notice that the Risedale
has a polarized plug (one blade is
wider than the other), which will only fit
into the outlet one way. If the plug
does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact
a qualified electrician to install the
proper outlet. Do not change the plug
6

Advertisement

Table of Contents
loading

Table of Contents