Assembly Instructions - Carex Risedale User Manual

Assembly Instructions

Choose a clean area to assemble your Risedale.
After the box is removed, flip the chair over. Save the box and all
packing materials in case you have to return the chair.
RISEDALE USER GUIDE
Serial Number
4
Screw in the legs and
tighten with the hex
key provided. We
advise using
the supplied wood
screws to secure
the legs further.
Note: If any leg will not
screw in by hand, do
not force it. Unscrew
the leg, check for and
clean out any debris in
the threaded hole and
try again.
Important Note: The
back legs have a "right"
and "left" side. When
installed properly, the flat
edge of the back legs
should be pointing
inwards, otherwise the
chair will not sit properly.
For users shorter than
5'1" remove
the leg extensions
using the hex
key provided.