Innovative Lift & Look Feature; Using The Bun Rack - Catler 400 series Instructions For Use Manual

button when the desired toast colour is
achieved.
5. Approximately 10 seconds before the end
of the selected browning setting, the Lift &
Look button will cease illumination. As the
toasting stops and the carriage rises, the
TOAST/CANCEL button surround will fl ash
and the LED toasting progress indicator will
cease fl ashing. The LED toasting progress
indicator will re-illuminate to the previously
selected browning setting.
6. Once the toasting cycle has finished and
the carriage has risen and locked into the
raised position, the toast ready alert will
sound. Remove the toast. The TOAST/
CANCEL button surround will re-illuminate
in blue for up to 30 seconds, ready for
the next toasting cycle. The DEFROST
button surround will remain illuminated
and should be pressed once to cancel if
a subsequent toasting function is required.
The DEFROST button surround will cease
to illuminate after 30 seconds or when
the appliance is switched off at the power
point.
Innovative LIFT & LOOK feature
This feature automatically raises and lowers
the carriage so you can check progress without
interrupting and/or cancelling the toasting
cycle.
10
OPERATING YOUR TS 4011 TOASTER
To select this feature:
1. The Lift & Look button surround will
illuminate in blue during the toasting cycle
and when using the A BIT MORE, CRUMPET
and DEFROST features. You can press the
Lift & Look button during toasting cycle to
view the toasting progress. If selected, the
Lift & Look button surround will fl ash. The
LED toasting progress indicator will cease to
fl ash indicating that the selected toasting
cycle time has not been interrupted.
When the Lift & Look cycle has finished, the
toasting cycle will re-commence, indicated
by the resumed fl ashing of LED toasting
progress indicator.
2. Approximately 10 seconds before the end
of the selected browning setting, the Lift
& Look button will cease illumination and
cannot be activated in this time.

Using the Bun Rack

Place the bun warmer rack onto the slots at the
top of the toaster, ensuring it is securely placed.
Set the browning control to setting ´1´ only.
Press the TOAST/CANCEL button to start. Wait
for the toaster to switch off automatically, or
press the TOAST/CANCEL button to switch the
toaster off before removing the buns. Repeat
the operation again if desired brownness is
needed. Take care not to touch the metal parts
of the bun rack as this will be hot.