EN
RINSE ASSEMBLY
1.
Carefully unscrew the jets and take out the rinse jet spinners.
2.
Immerse the jets in a solution containing some liquid descaling product (for ex. Vinegar).
3.
Rinse with water. If necessary clean the jets with a pin.
4.
Before replacing the jets and the spinners run a filling/draining cycle in order to clean the rinse assembly from soil
or debris.
5.
Replace the jets and the diffuser back onto the rinse assembly.
INDUSTRIAL GLASS AND DISHWASHER—USERS MANUAL
ATTENTION
When clearing always wear rubber gloves.
- 15 -