Table of Contents
Advertisement
EN
AUTOMATIC DRAIN PUMP (optional equipment):
These models are not equipped with the "overflow" system and they should be used only when the discharge of water is placed
above the water level in the tank.
The drain pump automatically operates during the washing cycle while maintaining a constant water level in the tank. When you
need to drain the water in the tank, proceed as follows:
1.
With the machine switched on, switch 0/1 to 1 and hold the drain button (4) for 3 seconds.
2.
The drain indicator light (4a) will turn on and the drain cycle will automatically start.
3.
Wait until the light (4a) has turned off, open the door and check that the tank is completely empty. If there is still
some water, repeat again the drain cycle.
INDUSTRIAL GLASS AND DISHWASHER—USERS MANUAL
- 12 -
Hide quick links:
Advertisement
Table of Contents
