EN
WASH / RINSE ARMS - ROTATING TYPE
1.
Unscrew the centre spindle and lift out the wash arm.
2.
Unscrew the nuts (A1-A2) and remove the jets (B1-B2).
3.
Immerse the jets in a solution containing some liquid descaling product (example: Vinegar)
4.
Rinse with water. If necessary, clean the jets with a pin.
5.
Check that there are no scale deposits on the arm or spindle.
6.
Reverse the assembly.
7.
It is suggested to wash and clean jets (B1) individually to avoid incorrect assembly.
DIAGRAM OF THE CORRECT POSITION OF THE JETS
INDUSTRIAL GLASS AND DISHWASHER—USERS MANUAL
ATTENTION
When clearing always wear rubber gloves
- 14 -