Data Usage Settings - Samsung Galaxy J3 Emerge User Manual

Change your phone name: From Bluetooth settings, tap More options > Rename device,
n
enter a new name, and tap Done.
This changes the name of your phone as seen by other devices.
l
Pairing Bluetooth devices: Make sure the other devices are set to be discovered. From
n
Bluetooth settings, tap the device name in "Available devices" and follow the prompts.
Depending on the device, you may be required to enter or accept a passkey.
l
If the target device does not appear, tap Scan to search again.
l
This setting is available when Bluetooth is enabled.
l
Change the name of a paired device: From Bluetooth settings, tap Settings
n
paired device name, tap Rename, enter a new name, and tap OK.
Emoji cannot be used in a device name.
l
This setting is available when Bluetooth is enabled.
l
Canceling pairing: From Bluetooth settings, tap Settings
n
and then tap Unpair.
This setting is available when Bluetooth is enabled.
l
Enable service from paired device: From Bluetooth settings, tap Settings
n
paired device name, and then tap the listing under Profiles.
If a confirmation prompt appears, follow the prompts.
l
This setting is available when Bluetooth is enabled.
l
This setting is available when the paired device is providing a service.
l
Tap the setting to toggle On/Off.
l
Search for other devices: From Bluetooth settings, tap Scan.
n
This setting is available when Bluetooth is enabled.
l
Check files received using Bluetooth transfer: From Bluetooth settings, tap More options
n
> Received files, and then follow the prompts.

Data Usage Settings

The data usage menu lets you view your phone's mobile and Wi-Fi data usage, set data limits,
restrict hotspot usage, and more.
Settings Connections Settings
next to a
next to a paired device name,
next to a
189