Advertisement
External battery configurations require the use of Tripp Lite's External Battery Configuration Software(see manual)
Hot-swappable, user-replaceable internal batteries and external battery packs can be replaced with no disruption to connected equipment
Intelligent battery management system extends battery life
Front panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens
of detailed UPS and site power information
LCD interface also supports a number of advanced user setup and operating preferences
Ships with 4 post rackmount installation hardware; Optional
enables tower placement
Built-in USB, RS-232 and optional
HID-compliant USB port enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
Included PowerAlert UPS monitoring software; Built-in Emergency Power Off(EPO) interface with cable
Specifications
OUTPUT
Output Volt Amp Capacity (VA)
Output kVA Capacity (kVA)
Output Watt Capacity (Watts)
Output Capacity Details
Power Factor
Nominal Output Voltage(s)
Supported
Nominal Voltage Details
Frequency Compatibility
Output Voltage Regulation (Line
Mode)
Output Voltage Regulation (Battery
Mode)
Output Receptacles
Load Management Receptacles
Output AC Waveform (AC Mode)
Output AC Waveform (Battery Mode)
INPUT
Rated input current (Maximum Load)
Nominal Input Voltage(s) Supported
UPS Input Connection Type
UPS Input Cord Length (ft.)
UPS Input Cord Length (m)
2POSTRMKITWM
SNMPWEBCARD
accessory monitoring options
1000
1
900
Output is reduced to 800 watts maximum when used with external battery packs
.9
110V; 115V; 120V
120v nominal output in battery mode
60 Hz
120V (+6%, -14%)
+/-5%
(8) 5-15R
Two switchable two outlet 5-15R load banks
Pure Sine wave
Pure Sine wave
9.2A
120V AC
5-15P
10
3
enables 2 post rackmount/wallmount installation; Optional
2 / 5
2-9USTAND
Advertisement
