Starting And Stopping - BEFCO CYCLONE C30-CE5 Operator's Manual

Engine driven grooming mower
Table of Contents

Advertisement

C
YCLONE
12. To reduce fire hazard, keep engine free of grass, leaves or excessive grease.
13. Do not change the engine governor settings or over-speed the engine.
1. Be sure that no one is near the machine prior to engaging or while the machine is
working.
2. Be sure the towing vehicle is in "Neutral" before starting engine.
3. Mower operating power is supplied from mower engine. Refer to your engine manual
for engagement and disengagement instructions. Know how to stop the towing
vehicle and mower quickly in case of an emergency.
4. Open doors if engine is running in the garage; exhaust fumes are dangerous. Do not
run engine indoors.
5. After striking an obstacle, stop mower engine, remove the wire from the spark plug,
shut the towing vehicle down and thoroughly inspect for damage before restarting.
6. Do not operate if mower vibrates excessively. Excessive vibration is an indication of
damage.
7. Stop mower engine before backing up. Do not cut in reverse. Carefully observe area
behind mower before backing up.
8. Stop mower engine and watch out for traffic when crossing gravel drives, walks or
roads.
9. Stop mower engine, towing vehicle engine and set parking brake before leaving
operator's position.
10. Stop mower engine, towing vehicle engine, disconnect spark plug wire, set parking
brake and wait for all movement to stop before making any repairs or adjustments.
11. Never adjust cutting height or leveling linkage while the engine is running.
12. Stop mower engine when transporting or not in use.
13. When leaving towing vehicle unattended, set parking brake, stop both engines and
remove key.
14. Never store the equipment with gasoline in the tank inside a building where fumes
may reach an open flame or spark. Allow engine to cool before storing in any
enclosure.
1. Read and adhere to all safety and operating decals on this machine (see fig. 2).
2. Before dismounting towing vehicle: allow moving parts to stop, stop both engines,
set brake and remove the key of unattended equipment.
3. Keep away from rotating blades.
4. Keep guards and shields in place and in good condition.
S
P
AFETY
RECAUTIONS

2.02 - Starting and Stopping

2.03 - Messages and Signs
7
O
'
M
PERATOR
S
ANUAL
BEFCO

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CYCLONE C30-CE5 and is the answer not in the manual?

Table of Contents