Specifications; Duty Cycle - Eastwood versa-cut 20 Assembly & Operating Instructions

Table of Contents

The Eastwood-designed Versa-Cut Plasma Cutter is a compact, lightweight yet powerful Plasma Cutter capable of cutting a range of material from the

thinnest steel and aluminum up to full 1/8" thick with ease and precision. A convenient Pilot Arc feature allows for instant plunge cutting.

SPECIFICATIONS

Amperage

Output

Range

Voltage

Weight

15 ±1

85.9 V

14.75

Amps

Lbs

DUTY CYCLE

The rated Duty cycle refers to the amount of plasma cutting that can be done within a measured amount of time. The Eastwood Cut-20 Plasma Cutter has a duty

cycle of 40% at 15 Amps.

It is easiest to look at your cutting time in blocks of 10 Minutes and the Duty Cycle being a percentage of that 10 Minutes. If cutting at 15 Amps with a 40% Duty

Cycle, within a 10 Minute block of time you can cut for 4 Minutes with 6 Minutes of cooling time allowed for the cutter.

Pilot

Duty

Post

Arc

Cycle

Flow

Current

40%

20 sec.

14±1

@ 15 A