Table of Contents
Advertisement
Option
Restore default settings
* See "Operating the Text Input Keyboard" (A159) for information on how to enter
alphanumeric characters.
Re-pairing
Re-pair when pairing the same smart device again after unpairing using End pairing
in the SnapBridge app.
Android Devices with NFC Support
1
Select Connect to smart device in the
network menu, press the k button,
and then press the k button when the
dialog shown on the right is displayed.
An NFC confirmation dialog is displayed.
2
Touch the camera Z (N-Mark) to the
NFC antenna on the smart device.
Launch the SnapBridge app. When the
confirmation dialog for connecting is displayed,
tap OK.
Enable NFC on the smart device in advance, and
then close all apps that use NFC (including the
SnapBridge app).
If the SnapBridge download site is displayed,
download and install the app before repeating the above steps.
3
Follow the instructions on page 19, starting with Step 4.
Using the Menu
The Network Menu
Restore all network menu settings to their default values.
This setting cannot be selected while a wireless connection
is established.
157
Description
Use SnapBridge to send photos to your
smart device and share them online.
To skip this screen and set SnapBridge
later from the Network menu, press
MENU.
Later
Later
Set
Set
Advertisement
Table of Contents
