Download Print this page

Denon AVR-3200 Operating Instructions Manual page 31

Av surround receiver
Hide thumbs Also See for AVR-3200:

Advertisement

Using the Dolby Digital mode
Play a pie—recorded source (LD or DVD) with the
0°°'°I
mark.
AC3 D I G I T A L
1
DVDNDP
IDVDNDPI
Press the DVD/VDP button.
a
M%i:Rc
ANALOG/DIGITAL
Select the DIGITAL input mode.
1Z
'.
r-::-i
cD
®—
'—::
@::
®@-
3
AUTO/MANUAL
RFAUTO/MANUAL
Select the audio input mode. The mode switches as
:\
c:E:\
shown on the right each time the button is pressed.
['
DVD AUTO
DVD/VDPI
AC—3RF
—i
DVD AUTO
Some video discs with Dolby Digital AC—3 audio have only digital or analog audio. When using such discs, this mode
automatically switches the audio input according to the type ofaudio Dolby Digital IAC—3), digital or analog) being played.
DVD AC—3RF
Only the Dolby Digital IAC—3l audio is played.
DVD/VDP
The audio is input according to the analog/digital input setting on the main unit or remote control unit.
NOTES:
. In the
"
DVD AUTO" mode, when the mode changes from pause, chapter search, etc., to playback during playback of the Dolby Digital audio on
an LD, the PCM or analog sound may be output momentarily before the mode is switched to the Dolby Digital audio mode.
If this happens, the sound will not be interrupted if you switch to the
"
DVD AC—3RF" IAC—3RF fixed input) mode.
. The audio input mode setting is reset to
"
DVD AUTO" when the power is turned off using the power switch on the remote control unit or on the
main unit.
4
DOLBY
SURROUND
MODE
Lt
:\
\\
I
Set the DOLBY SURROUND mode.
5
Start playback on the selected component.
For operating instructions, refer to the various components' manuals.
Lit
When Dolby Digital (AC—3) encoded signals are played, the PRO LOGIC indicator turns off and the Dolby
Digital indicator lights.
DIGITAL
. The PRO LOGIC indicator lights when a 2—channel Dolby Digital IAC—3) signal is input.
6
MASTER VOLUME
MASTER VOL
Adjust the MASTER VOLUME control.
7
ENTER
Set the surround parameter on the monitor according to the source
(_;
and adjust the tone.
Menu
%U\
First press the ENTER button.
rSystem Setup
Surround Parameters
Menu Off
12
50
cE
con
cD c
0
31

Advertisement

loading