Hyundai VELSOTER Owner's Manual page 263

CRUISE CONTROL SYSTEM (IF EQUIPPED)
■ ■ T T y y p p e e A A
■ T y p e B
■ T y p e B
1. Cruise indicator
2. Set indicator
The cruise control system allows you to
program the vehicle to maintain a con-
stant speed without depressing the
accelerator pedal.
This system is designed to function
above approximately 30 km/h (20 mph).
WARNING
• If the cruise control is left on,
(CRUISE indicator light in the
instrument cluster illuminated)
the cruise
switched on accidentally. Keep
the cruise control system off
(CRUISE indicator light OFF)
when the cruise control is not in
use, to avoid inadvertently set-
OFS053069
ting a speed.
• Use the cruise control system
only when driving on open high-
ways in good weather.
• Do not use the cruise control
when it may not be safe to keep
the vehicle at a constant speed,
for instance, driving in heavy or
varying traffic, or on slippery
(rainy, icy or snow-covered) or
winding roads or over 6% up-hill
or down-hill roads.
OFS055069L
• Pay particular attention to the
driving conditions
using the cruise control system.
During cruise-speed driving with a
manual transaxle vehicle, do not
shift into neutral without depress-
ing the clutch pedal, since the
control can be
engine will be overrevved. If this
happens, depress the clutch pedal
or release the cruise control ON-
OFF switch.
✽ NOTICE
During normal cruise control operation,
when the SET switch is activated or
reactivated after applying the brakes,
the cruise control will energize after
approximately 3 seconds. This delay is
normal.
✽ NOTICE
To activate cruise control, depress the
brake pedal at least once after turning
the ignition switch to the ON position or
whenever
starting the engine. This is to check if
the brake switch which is important
part to cancel cruise control is in normal
condition.
Driving your vehicle
CAUTION
5 57