Hyundai VELSOTER Owner's Manual page 236

Driving your vehicle
CAUTION
• If the vehicle is held by applying
accelerator pedal at the hill, the
transmission and clutch will be
damaged. To hold at the hill, use
the parking brake or foot brake.
• An overload of the clutch is indi-
cated by a longitudinal judder and
a blinking display. To exclude a
clutch-damage, the clutch is
opened and the torque flow inter-
rupted. If the clutch is opened,
apply the foot brake and wait
some minutes before driving
again.
• Ignoring the warnings can lead to
severe injuries and damage on
the car.
• If the LCD warning is active, the
foot brake has to be applied.
• When the problem of gear system
occurs, the transmission indica-
tor will blink. For your safety, we
recommend that you contact an
authorized HYUNDAI dealer and
have the system checked.
5 30
(Continued)
■ For Type B cluster
• When the clutch is overheated,
the safe protection mode oper-
ates. According to the safe pro-
tection mode, the transmission
indicator blinks with chime sound.
In this time, the LCD warning
about safe protection mode also
displays. In this condition, the
driving may not be smoothly. If
you ignore this warning, the driv-
ing condition is getting worse and
the system may have problem. To
return the normal driving condi-
tion, apply the foot brake and
stop the vehicle for few minutes
(Continued) before driving off.
(Continued)
• While shifting the gear automati-
cally, you may feel a correspon-
ding shifting of gear. However, it
is not malfunction.
• During the first 1,500 km (1,000
miles), you may feel that the vehi-
cle may not be smooth when
accelerating at low speed. During
this break-in period, the shift
quality and performance of your
OFS045322L
new vehicle is continuously opti-
mized.
(Continued)