Connection Diagram (Basic); Connecting The Disklavier To The Internet; Preparation; Connecting The Control Center Unit To The Internet - Yamaha DISKLAVIER ENSPIRE User Manual

Connection Diagram (Basic)

Connecting the Disklavier to the Internet

You can connect the Disklavier to a full-time online Internet connection (ADSL, optical fiber,
cable Internet, etc.) via a router or a modem equipped with a router.
„ Preparation
• To use the Internet connection, you will first need to subscribe to an Internet service or
provider.
• Use a computer to obtain and configure the device for Internet service. You cannot obtain
Internet service or configure router settings on a local area network using the Disklavier
itself.
• Use a standard LAN cable to connect the Control Center Unit and a router.
• Before connecting the LAN cable, make sure to turn off (or shut down) the Disklavier.
„ Connecting the Control Center Unit to the Internet
Connection example 1:
Using a modem with router function
LAN cable
Note:
• D epending on the contract with your Internet provider, you may not be able to connect two or
more devices (for example, a computer and the Disklavier) to the Internet. Please check your
contract or contact your Internet provider for further information.
• S ome types of modems (such as ADSL modems or cable modems) have multiple ports for
connecting two or more devices (such as computer, musical instrument, etc.). If your modems
have only one port, an optional router or hub is required in order to connect several devices
simultaneously.
Modem
(with router function)
Other device
(such as computer)
Control Center Unit
(Grand Piano)
Inlet Box
(Upright Piano)
Connection example 2:
Using a modem without router function
LAN cable
DisklavierTV User's Guide (For Disklavier ENSPIRE Users)
Modem
(without router
function)
Router
Other device
(such as computer)
Control Center Unit
(Grand Piano)
Inlet Box
(Upright Piano)
10