Help - Veon VN4019LEDDVD Instruction Manual

No Power
Cannot Receive Signal Properly
No picture
Video is working, but have no audio
The TV has no response with remote.
No Video In (PC MODE)

HELP

Please check if the AC power cable is connected to the
TV unit and switched on at the socket outlet. If the TV
still does not operate check the socket outlet has power
by trying another appliance in the socket.
Double or Phantom imaging may occur in high buildings
or when surrounded by mountains. Please;
‐
Consult Television provider; or
‐
Manually change the direction of external
antenna
If you are using an indoor antenna receiving a signal will
be more difficult. Proceed to adjust and move antenna
until desired picture is shown. If image does not change,
you have to use external antenna.
Check the antenna at the back of the TV is connected
properly. Try to select other channels to check whether it
is the TV or just the channel itself. Ensure the TV is
tuned correctly (follow instructions under CHANNEL
Menu on page 13-14)
Try increasing the volume on you remote control.
Double check that mute function on you remote has not
been selected. Press Mute button to resume sound
Operate the remote directly facing the sensor on the front
of the TV. Please check that the batteries polarity are
installed correctly. Please try using a new set of
batteries. The TV will shift to STAND BY if no response
from the remote in a few minutes
Please check if the display cable connected to the VGA
is correct. Please check that the cord is not damaged nor
is there a bend in the cable
38