DeWalt DWFP55130 Instruction Manual page 14

FREE WARNING LABEL REPLACEMENT: If your warning labels
become illegible or are missing, call 1-800-4-D
9258) for a free replacement.
GLOSSARY
WALT (1-800-433-
E
CFM: Cubic feet per minute.
SCFM: Standard cubic feet per minute; a unit of measure of air
delivery.
PSIG: Pounds per square inch gauge; a unit of measure of pressure.
kPa (kilopascal): Metric pressure measurement. 1 kilopascal equal
1000 pascals.
Code Certification: Products that bear one or more of the following
marks: UL
evaluated by OSHA certified independent safety laboratories and
meet the applicable Standards for Safety.
*UL ® is a registered trademark of Underwriters Laboratories and ETL
is a registered trademark of Electrical Testing Laboratories.
Cut-In Pressure: While the motor is off, air tank pressure drops
when accessory is used. When the tank pressure drops to a certain
low level the motor will restart automatically. The low pressure at
which the motor automatically restarts is called cut-in pressure.
Cut-Out Pressure: When an air compressor is turned on and
begins to run, air pressure in the air tank begins to build. It builds
to a certain high pressure before the motor automatically shuts
off, protecting your air tank from pressure higher than its capacity.
The high pressure at which the motor shuts off is called cut-out
pressure.
Branch Circuit: The circuit carrying electricity from electrical panel
to outlet.
14
® , CUL, CULUS, ETL ® , CETL, CETLUS, have been
®