Dell OptiPlex 330 Quick Reference Manual page 39

floppy drive
3
4 drive activity light
USB 2.0 connectors
5
(2)
diagnostic lights
6
7 power button,
power light
8 headphone connector Use the headphone connector to attach headphones
9 microphone
connector
10 LAN indicator light
A floppy drive is optional.
The drive activity light is on when the computer reads
data from or writes data to the hard drive. The light
might also be on when a device such as an optical drive
is operating.
Use the front USB connectors for devices that you connect
occasionally, such as joysticks or cameras, or for bootable
USB devices (see "System Setup Options" in the online
User's Guide for more information on booting to a
USB device). It is recommended that you use the back
USB connectors for devices that typically remain
connected, such as printers and keyboards.
Use these lights to help you troubleshoot a computer
problem based on the diagnostic code. For more
information, see "Diagnostic Lights" on page 56.
Press the power button to turn on the computer.
The light in the center of this button indicates
power state.
NOTICE:
To avoid losing data, do not use the
power button to turn off the computer. Instead,
perform an operating system shutdown.
and most kinds of speakers.
Use the microphone connector to attach a personal
computer microphone for voice or musical input into a
sound or telephony program.
On computers with a sound card, the microphone
connector is on the card.
This light indicates that a LAN (local area network)
connection is established.
Quick Reference Guide
39