Loss Of System Water Pressure; Low Water Pressure - IDEAL VOGUE COMBI C26 User Manual

Gen2
Hide thumbs Also See for VOGUE COMBI C26:
Table of Contents

Advertisement

LOSS OF SYSTEM WATER PRESSURE

The pressure gauge (G) indicates the central heating system pressure. If the pressure is seen to fall below the original installation
pressure of 1.0 & 1.5 bar then conduct the re-pressurising procedure as shown below. If unable to do so or if the pressure continues
to drop a Gas Safe Registered Engineer or in IE a Registered Gas Installer (RGII) should be consulted.
THE BOILER WILL NOT OPERATE IF THE PRESSURE HAS REDUCED TO LESS THAN 0.5 BAR UNDER THIS CONDITION.
In this case the following display will appear:

LOW WATER PRESSURE

With boiler o & system cold
fill system to between 1.0 & 1.5 bar
(Press PICTURE to see how)
Bleed radiators then refill
If fault persists contact Ideal (01482 498660)
If pressure loss re-occurs contact installer
PICTURE
EXIT
10
Under boiler,
turn blue & black
handles in line with
pipes to fill
EXIT

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vogue combi c40Vogue combi c32

Table of Contents