Generac Power Systems 15 kw ecogen Installation Manuallines page 13

10. Perform a visual inspection for any hidden freight
damage. If damage is present, contact the freight
carrier.
Figure 2-5. Inspect for Damage
Figure 2-6. Customer Connection Area and Loose Parts Location
A
B
C
D
Figure 2-7. Rear of Generator
Installation Guidelines for 60 Hz EcoGen™ Generator
11. Figure 2-6
A. Customer connection area (underneath and behind
the control panel)
B. Fuel regulator
C. Battery compartment
D. Positive (+) and Negative (–) Battery Cables
E. Location of "Parts Shipped Loose"
001374
Figure 2-7 illustrates the following:
A. Main AC/Control Wiring hole for 3/4 inch conduit
B. Main AC/Control Wiring hole for 1–1/4 inch conduit
C. Fuel Inlet Connection
D. Base Fascia (if equipped)
001376
Unpacking and Inspection
illustrates the following:
A
B
D
E
C
001375
9