Part
Drum Removal
Sensor
(Thermistor,
Thermostat)
Removal
figure
1. Disconnect the power supply to the unit.
2. Remove the Top Cover, the console, the Front
3. Remove Belt.
4. Remove the Drum.
1. Disconnect the power supply to the unit.
2. Remove the Top Cover, the console, and the Front
3. Remove 2 Housing Sensor.
4. Remove the Sensor.
Description
panel, the Plate(u), and the Front Bulkhead.
panel.
Do not apply excessive force to the terminal.
Removal and Reassembly _ 17