Part
front Bulkhead
Removal
figure
1. Disconnect the power supply to the unit.
2. Remove the Top Cover, the Console, the front
3. Separate the wire in the wire Holder (2EA).
4. Disconnect Interior Light wiring Harness.
5. Remove the four bulkhead retaining 5 screws.
6. Disconnect the moisture Sensor wiring Harness.
7. Lift Bulkhead from the cabinet then remove it.
8. Remove 2 screw from the Duct Outlet.
9. Remove the Duct Outlet.
Description
panel and the Plate(u).
Removal and Reassembly _ 15