Advertisement
Configuring the PathFinder settings
To set the PathFinder:
From the main screen, tap Settings >
1.
PathFinder.
2. Tap the item you want to configure to show the
configuration options.
3. Select your prefered options.
From the Settings, you can configure the following settings:
Items
PathFinder Device
LED Bright Type
Show Direction
Speed/Distance Display
Camera Alarm
PathFinder Version Info.
LED Testing
Notices
1. Underwriters Laboratories Inc. ("UL") has not tested the performance or reliability of the Global Positioning System ("GPS")
hardware, operating software or other aspects of this product. UL has only tested for fire, shock or casualties as outlined in UL's
Standard(s) for Safety.UL60950-1 Certification does not cover the performance or reliability of the GPS hardware and GPS
operating software. UL MAKES NO REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING
THE PERFORMANCE OR RELIABILITY OF ANY GPS RELATED FUNCTIONS OF THIS PRODUCT.
2. Use only with Listed ITE.
Allows you to turn on/off the PathFinder device.
Allows you to select the LED brightness.
Allows you turn on/off the the direction display function.
Allows you to select either speed or distance information to display on the
PathFinder. You can also turn off this function.
Allows you to turn on/off the camera alarm function.
If it is set to On, the camera alarm icon on the upper-right corner of the
PathFinder screen lights up when a Speed Camera is detected.
Allows you to check the PathFinder version.
Automatically tests the LED lightness.
Descriptions
Advertisement
