Advertisement
10. Wipe off the excess water around the reflection layer film.
Note: Repasting the reflection film more than once degrades its adhering quality.
11. One side of the velcro fastener is preattached to the plate of the PathFinder. Attach the other side of the
velcro fastener to your vehicle's dashboard. Press firmly to ensure that the PathFinderis firmly attached to
the dashboard.
Using the PathFinder
1. Turn on the PathFinder and R710(t)/R800
Navigator.
From the main menu, tap Navigation >
2.
When route setup is completed, tap Start
Navigating.
The PathFinder displays direction, distance/
speed information, and the camera alarm icon on
the projection area on the windshield.
Note: I
f you want to change the PathFinder settings, exit the navigation mode, then from the main screen, tap Settings
>
PathFinder.
Route.
Advertisement
