Compaq 2200 Series Maintenance And Service Manual page 25

MSG Index Product Description
Home
REMOVAL & REPLACEMENT
DISASSEMBLY
SEQUENCE
Riser Card (Backplane)
Preliminary
considerations
Hood
Button board
Front bezel
Speakers
Fax-modem
NIC card
Riser card
Mass storage
devices
Power supply
System board
components
Maintenance and Service Guide
Compaq 2200 and 2400 Series Computers
Troubleshooting
Removal & Replacement
Jumper & Switch Information
Illustrated Parts Catalog
Specifications
There are six steps in this sequence.
1
Perform preparation
2 Remove the hood.
3 Remove the fax-modem.
4 Remove the NIC card, if present.
5 Remove the three screws holding
the riser card to the cross-brace
bar.
NEXT STEP
procedures.