Hisense 40 FHD LED D60 User Manual page 9

NOTE
An USB storage device must be attached to
the television for recording purposes. Please
refer to the PVR section of this manual.
• EPG functions
The Remind function will change automatically
channels at the correct time so that you do
not miss programs of interest. Select the
program from the EPG and press the [BLUE]
button "Reminder " to setup this feature.
Press the [GREEN] button "NextDate"
when the EPG is active to display detailed
information and comments about television
programs of tomorrow.
Press the [YELLOW] button "Schedule" to
display a list of scheduled recordings and
reminders.
How to record program using PVR Function
The PVR list function enables the user to easily
record the digital television content for later
viewing. The function is to be used in DTV source
only, the format of storage disk must be FAT32.
This option does not commence if the data
storage device has not been connected. There
are two options, one is to press [PVR] button on
remote control and then press [Play]. Second one
is to press [EPG] button and then select a
program to record by pressing [
If you selected the program in advance for
recording, please first switch to the desired
channel and then press [EPG]. Choose time for
scheduling in advance recording, then let TV
fetch the information. After this, select your
desirable time and press [
your recording.
Press the [Sleep] button repeatedly to set the
desired time period before the TV turns off
automatically. To cancel the sleep time, press
the [Sleep] button repeatedly until the Off option
appears.
NOTE
If TV already set for parental guidance,
you need to check the rating of the desired
schedule program for recording with the
level of your setting. If the selected program
for recording is over the selected parental
guidance rating, TV will not start recording the
program.
Using the Remote Control
] button.
] button to schedule
8