Using The Remote Control - Hisense 40 FHD LED D60 User Manual

Turning your TV on and off
• Turning off to standby mode: Press [
Standby] on the back RHS panel or on the
remote control to switch to standby mode.
You can activate the unit again by pressing
[ Power Standby].
• Power indicator: Light indicates standby mode.
There will be no light when the power switch is
in the off position.
NOTE
Remove the connection from the wall power
outlet if you do not intend to use the unit for
long periods, for example if you plan to be
away a few days. Wait at least 5 seconds
after turning off if you want to re-start the TV.
Selecting the Input Source
• Select the Input Source depending on the
video device you have connected to your TV.
• To select the Input Source:
Press [Source] button. When the list of Input
Source appears, press [▲/▼] to select the
source, then Press [OK] to connect.
Adjusting the volume
Press [VOL˄/VOL˅ ] to increase or decrease the
volume.
Press [ Mute ] to turn the sound off. Press
[ Mute ] again to turn the sound back on.
Changing channels
Press the [CH Λ/CH V] buttons to go to the next
higher or lower channel. Or, Press the number
buttons to select a channel. For example, to
select channel 12, press [1], then press [2].
Selecting the sound mode
Press the [Sound] button to select between 5
different pre-adjusted sound modes: Standard,
Music,Movie,Sports and Personal
Selecting the picture mode
Press the [Picture] button to select between 6
different pre-adjusted picture modes: Standard,Cinema
Day,Cinema Nighe,PC Game,Dynamic and Personal.
Selecting the aspect ratio
Press the [Zoom] button to change the screen
aspect ratio among Normal,4:3,Wide,Zoom and Cinema.

Using the Remote Control

Power
NOTE
The option of aspect is vary with different
source.
Freezing a picture
Press the [Still] button to freeze the image at any
moment.
Press again to resume normal motion.
Setting the sleep timer
You can specify how long you want your TV to
wait for before it automatically turns off.
Pressing [Sleep] button repeatedly will allow you
to change the sleep timer mode: Off,15Min,30Min,
45Min,60Min,90Min,120Min and 240Min.
Audio function
Pressing [ I/II ] button the TV screen will display
the Audio options such as Stereo,Dual I,Dual
II,Mixed.
Displaying Channel List
Press [OK] to display the full list of digital and
analogue channels available.
Electronic Programming Guide (EPG)
Provides convenient access to the television
programs that will be available in the next 7
days. The information displayed by the EPG is
made available by the commercial television
networks for digital channels only. The EPG also
provides a simple way to program the recording
of your favorite programs. There is no need to
setup complicated timers.
7