Bauhn AMHFB-815 Instruction Manual page 17

Instructions (Cont.)
MP3 Track Format Requirements
Playback performance of MP3 discs varies depending on the quality of the
recording disc and the method of recording. Furthermore, because of the
different format, the searching lead-time for an MP3-CD is longer than for a
normal audio CD.
Repeat Mode (for both audio CDs and MP3 discs)
• Press the REPEAT button on the remote control before or during playback
to select playback of a single track, or all tracks in different modes, as
follows: Repeat (1 track): "REPEAT" will blink on the display
tracks"): "REPEAT" will display steadily on the display.
CD/MP3-CD Programming
Up to 15 tracks can be programmed for disc playback in any order. Before
programming, be sure to press the STOP button.
• Press the FUNCTION button on the remote control repeatedly, or the CD
button on the front panel, to select "DISC" mode, then stop CD playback.
• Press the PROG button: "MEM" will start flashing on the display and the
program number and digits for the track number to be programmed will
also appear on the display.
• Select the desired track by pressing the numeric buttons.
• Press the PROG button to store the track into memory.
• Repeat the last two steps to enter additional tracks into the memory, if
required.
• When all desired tracks have been programmed, press the PLAY/PAUSE
button to play the disc in assigned order.
• Press the STOP button to stop program play and clear all memory: the
"MEM" indicator will disappear from the display.
AUS
1300 886 649
Model: AMHFB-815 Product Code: 51509 10/2016
Repeat (all
www.tempo.org
11