Instructions (Cont.)
Radio Operation
Manual Tuning
• Press the FUNCTION button on the remote control repeatedly, or the
TUNER button on the front panel, to select "TUNER" mode.
• Press the T-UP or T-DN button to tune into the desired radio station.
• Turn the VOLUME CONTROL knob to adjust to the desired volume level.
Auto Tuning
• Press the FUNCTION button on the remote control repeatedly, or the
TUNER button on the front panel, to select "TUNER" mode.
• Press and hold the T-UP or T-DN button for one to two seconds and then
release: the unit will start searching automatically and stop when a radio
station is found.
• Repeat the step above until you have found your desired radio station.
• Turn the VOLUME CONTROL knob to adjust to the desired volume level.
Presetting Stations
You can store up to a total of 30 radio stations in the memory.
• Press the FUNCTION button on the remote control repeatedly, or the
TUNER button on the front panel, to select "TUNER" mode.
• Use the manual or auto tuning method (described above) to tune into the
desired radio station.
• Press the PROG button to enable station programming.
• Press the NEXT or PREV button to select the desired station memory for
storage.
• Press the PROG button again to confirm the setting.
• Repeat steps above to store other stations.
• Press the NEXT or PREV button to select the preset stations in order.
• To return to normal tuner mode, wait a brief moment without touching any
buttons.
You can overwrite a preset station by storing another frequency in its place.
Press the numerical, NEXT or PREV buttons to navigate through stored
presets.
AUS
1300 886 649
Model: AMHFB-815 Product Code: 51509 10/2016
www.tempo.org
9