LG LP-E5020CL Service Manual page 41

7.2 Control
2
11
4
7
3
(Cooling Model)
2
11
4
7
3
(Heat pump Model)
1
A/CL
10
9
14
8
6
5
1
13
A/CL
10
12
14
8
6
5
¤ Signal Transmitter
• Transmits the signals to the package air conditioner
¤Ł Operation Display of the Remote Control
¤Ø Indoor Fan Speed Selection Button
• To select the desired fan speed in three steps [Low,
Med, High]
¤Œ Cooling ON Button
¤º Temperature Setting Buttons
¤ Power ON/OFF Button
• Operation will start when this button is pressed, and
stop when the button is pressed again.
¤ Timer Set Button
• Each time the button is pressed, the mode is changed
in the following process.
Timer set (1, 2, 3, 4, 5, 6, 7 hours)
If you select "0:00" the off Timer function will be can-
celled.
¤ Auto Airflow Direction Control Button
• The vertical louvers swing left and right.
• The horizontal louvers can be adjusted manually.
¤ Auto Mode Operation Button (Cooling Model Only)
¤ Plasma Air purifying Button (Option)
¤æ Indoor Fan Operation Button
¤ Heating Button (Heat Pump Model)
¤ Electric Heater ON/OFF Button (Option)
¤ Soft Dry Operation Button
Wireless Remote Control Puts all functions at your fin-
gertips
Handling the remote control
• Aim at the signal receptor on the package air con-
ditioner when operating.
• The remote control signal can be received at a
distance of up to about 7meters.
• Be sure that there are no obstructions between
the remote controller and the signal receptor.
• Do not drop or throw the remote controller.
• Do not place the remote controller in a location
exposed to direct sunlight, or next to a heating
unit, or other heat source.
– 41 –