Standby Mode; Info Button; Computer Display Options - Nyrius NPCS600 Instruction Manual

STANDBY MODE

Press the POWER button on top of the Receiver to go from "Active mode" to "Active
Standby mode". When the transmitter is connected to power the Receiver will wake
and reconnect.

INFO BUTTON

Press the INFO button on the Receiver or Transmitter. The Signal Quality, Source,
Channel and Resolution will be displayed on the OSD for your reference. Press the
INFO button again to exit.

COMPUTER DISPLAY OPTIONS

You can change the display option in the computer's display settings. Normal display
options are "Extend", "Duplicate", or "Show desktop only on ...". While all display
options are supported by the NPCS600 some computers do not support all. Please
check your computer manual for details on display options.
B A A
A A
Extend Duplicate Show desktop only on...
8