Wall Mounting; Drilling Template - Nyrius NPCS600 Instruction Manual

WALL MOUNTING

1. Drill pilot holes using drilling template included below.
2. Insert the supplied two anchors into the wall.
3. Insert two screws into the anchors. Leave 1/8" length for mounting the Transmitter
or Receiver.
4. Remove the rubber feet from the NPCS600. Place NPCS600 main holes over the
protruding screws and slide down into position.

DRILLING TEMPLATE

Note: This template is to scale. When printing out please ensure your printer setting is
set to Actual size (100%)
10