WHAT'S INCLUDED USB Power Cable Digital Wireless HD Transmitter Instruction Manual Digital Wireless HD Receiver Quick Start Guide 1 x 100-240V AC Power Adapter to Mini USB 1 Year Warranty Right Angle HDMI Adapter Lifetime Customer Support 2 x Screws/Screw Anchors PRODUCT OVERVIEW TRANSMITTER HDMI Input...
TRANSMITTER INSTALLATION • Connect the Transmitter directly to the HDMI output on a PC, cable box or any HDMI device. • Connect the Transmitter to power using the USB cable provided or connect the power adapter to the HDMI mini USB port on the Transmitter and plug it in to an available wall outlet.
RECEIVER INSTALLATION Receiver VIDEO 1 HDMI CABLE COMPONENT HDTV • Connect the HDMI cable to the HDMI Output of the Receiver and to your HDTV television or HD projector. • Ensure your TV or projector is powered ON and is in "HDMI input" mode. •...
LED BEHAVIOUR FUNCTION STATUS BEHAVIOUR SOLID WHITE CONNECTED Transmitter/Receiver is connected. Transmitter/Receiver are searching FLASHING WHITE CONNECTING for connection. SOLID ORANGE STANDBY Receiver is in standby mode. SLOWLY FLASHING PAIRING Receiver is in pairing mode ORANGE • If the system is unable to establish a connection within 80 seconds, the connection has been lost or the Transmitter is out of range.
You can change the display option in the computer’s display settings. Normal display options are “Extend”, “Duplicate”, or “Show desktop only on …”. While all display options are supported by the NPCS600 some computers do not support all. Please check your computer manual for details on display options.
PAIRING INSTRUCTIONS The NPCS600 Transmitter and Receiver come paired. If re-pairing is necessary use the below steps to reconnect the units. • Press and hold down the power button LED on the Receiver and plug in the power adapter. Release the Power button once the power LED blinks orange.
2. Insert the supplied two anchors into the wall. 3. Insert two screws into the anchors. Leave 1/8” length for mounting the Transmitter or Receiver. 4. Remove the rubber feet from the NPCS600. Place NPCS600 main holes over the protruding screws and slide down into position. DRILLING TEMPLATE Note: This template is to scale.
TROUBLESHOOTING PROBLEM SOLUTION POWER LED Make sure the power is connected to the Receiver/Transmitter. is not lighting Check that the power supplies are connected to a working power outlet. Some TV/Camera USB ports may not power TX/Receiver. The POWER LED of the Receiver should be WHITE and the LED Indicator of the Transmitter should be WHITE.
Page 12
Receiver. Some phones use substandard transmission schemes. Other If any other issue occurs or if the above issues persist, try disconnecting both Transmitter and Receiver and repeating the pairing process. For further questions or inquires, please contact NYRIUS customer support at: www.nyrius.com/contact...
1 RX / 1 TX Transmitter Dimensions 3.4 x 1.3 inches Receiver Dimensions 3.7 x 3.8 x 1.1 inches Adapter Compatibility Nyrius does not recommend using Digital to Analog Adapters with our ARIES Products, however HDMI to miniHDMI/microHDMI adapters are compatible...
FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the follow- ing two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
intended for the device and its users or bystanders to satisfy RF exposure compliance requirements. Receiver should be installed and operated with minimum distance 20cm between the radiator & your body RECEIVER For operation within 5.15-5.25 GHz / 5.47-5.725 GHz frequency range, it is restricted to indoor environment.
SAFETY INFORMATION Read all instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
NYRIUS. To the extent the law permits, NYRIUS disclaims any and all liability for direct or indirect damages or losses or for any incidental, special or consequential damages or loss of profits resulting from a defect in material or workmanship relating to the product, including damages for the loss of time or use of this NYRIUS product or the loss of information.