Sharp GX-CD30 Service Manual page 28

To have your order filled promptly and correctly, please furnish the
following information.
1. MODEL NUMBER
3. PART NO.
MARK: SPARE PARTS-DELIVERY SECTION
There are two types of capacitors available and they can be identified
from each other by reading their Part Numbers.
• Ceramic type capacitor;
A symblo "C" or "K" is given at the 3rd digit of its Part Number like
"VCC (or K)······J."
• Semiconductor type capacitor:
A symblo "T" is given at the 3rd digit of its Part Number like
"VCT······J." The capacitance error of each capacitor is indicated by
the symbol given at the 13th digit of the Part Number as follows: "J"
(±5%), "K" (±10%), "M" (±20%), "N" (±30%), "C" (±0.25 pF), "D"
(±0.5pF), "Z" (+80—20%).
Tubular type ceramic capacitor is identified by the symbol TV (TQ/
CY) of the part NO. VC00TV(TQ/CY)0000000; this TV(TQ/CY) does
not mean the lead wire.
Tubular type ceramic capacitor is identified by the symbol MF(MN) of
the part.
NOTE:
Parts marked with "
Be sure to replace parts with specified ones for maintaining the safety and performance of the set.
Downloaded from www.Manualslib.com
PARTS GUIDE
"HOW TO ORDER REPLACEMENT PARTS"
2. REF. No.
4. DESCRIPTION
CAPACITORS
" are important for maintaining the safety of the set.
manuals search engine
MODEL
Contact your nearest SHARP Parts Distributor to order.
For location of SHARP Parts Distributor,
Please call Toll-Free;
1-800-BE-SHARP
REFERENCE
Unless otherwise specified, resistors are ±5%, carbon type. Tubular
type carbon film resistor ±5% is identified the symbol TV (TQ/CY)
of the part No. VRS–TV(TQ/CY)0000000; this TV(TQ/CY) does
not mean lead wire.
Tubular type carbon film resistor ±5% is identified the symbol
MF(MN) of the part No. VRD–MF(MN)0000000; this MF(MN) does
not mean lead wire.
GX-CD30/30C/130/130C
GX-CD30
GX-CD30C
GX-CD130
GX-CD130C
For U.S.A. only
RESISTORS