Sharp GX-CD30 Service Manual page 9

Hide thumbs Also See for GX-CD30:
Table of Contents

Advertisement

CD SECTION
Since this CD system incorporates the following automatic
adjustment function, when the pickup is replaced, it is necessary
to reajust it.
Since this CD unit does not need adjustment, the combination
of PWB and laser pickup unit is not restricted.
TEST MODE
While holding down the "STOP" button, move the FUNCTION/POWER switch to "CD".
Start
Then, release the "STOP" button and, within 0.5 second, press the PAUSE button.
1. When the CD LID switch is in the OFF position, the unit will be able to enter the test mode.
Note
2. You can only move the pickup.
3. The LCD display should be the same as it is for normal CD operations.
Operation
1
2
3
LCD MODE
While holding down the "STOP" button, move the FUNCTION/POWER switch to "CD".
Start
Then, release the "STOP" button and, within 0.5 second, press the PAUSE button.
Display
* After the number
Downloaded from
www.Manualslib.com
However, playback cannot be performed in this mode.
The use of the "UP/CUE" button will move the pickup to the outermost position.
The use of the "DOWN/REVIEW" button will move the pickup to the innermost position.
When the "PLAY" button is pressed, the laser will be lit, and when the "STOP" button is pressed, it will be
turned off. Playback will also start and stop when these buttons are pressed.
a. If the "PLAY" button is pressed while in the stop mode, the laser will simply be turned on at first.
b. If the laser is lit and the "PLAY" button is pressed again, playback will start from the current pickup position.
c. If the "STOP" button is pressed, playback will stop. When pressed again, the laser will be turned off.
Turning the tracking servo on or off.
a. Each time the PAUSE button is pressed during playback, the tracking servo will be turned on or off.
(Note: If the PLAY button is pressed while in the stop mode, the tracking servo will automatically be
turned on.)
1
1 second
has appeared in the display, each time the "UP/CUE" button is pressed, the display will switch
in the following order:
,
, and then
manuals search engine
2
1 second
.
– 9 –
GX-CD30/30C/130/130C
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gx-cd30cGx-cd130cGx-cd130

Table of Contents