Convenient features of your vehicle
The high beam switches to low beam
in the below conditions.
- When the Smart High Beam is off.
- When the light switch is not in the
AUTO position.
- When the headlamp is detected
from the on-coming vehicle.
- When the tail lamp is detected
from the front vehicle.
- When the surrounding is bright
enough high beams are not need-
ed.
- When streetlights or other lights
are detected.
- When vehicle speed is below
35km/h (22 mph).
3-104
CAUTION
The system may not operate nor-
mally in the below conditions.
•
When the light from the on-
coming or front vehicle is not
detected because of lamp dam-
age, hidden from sight, etc.
•
When the lamp of the on-com-
ing or front vehicle is covered
with dust, snow or water.
•
When the light from the on-
coming or front vehicle is not
detected because of exhaust
fume, smoke, fog, snow, etc.
•
When the front window is cov-
ered with foreign matters such
as ice, dust, fog, or is damaged.
•
When there is a similar shape
lamp with the front vehicle's
lamps.
•
When it is hard to see because
of fog, heavy rain or snow.
•
When the headlamp is not
repaired or replaced at an
authorized dealer.
(continued)
(continued)
•
When headlamp aiming is not
properly adjusted.
•
When driving on a narrow
curved road or rough road.
•
When driving downhill or uphill.
•
When only part of the vehicle
in front is visible on a cross-
road or curved road.
•
When there is a traffic light,
reflecting sign, flashing sign
or mirror.
•
When the road conditions are
bad such as being wet or cov-
ered with snow.
•
When the front vehicle's head-
lamps are off but the fog lamps
on.
•
When a vehicle suddenly
appears from a curve.
•
When the vehicle is tilted from
a flat tire or being towed.
•
When
the
LDWS
Departure Warning System)
warning light illuminates. (if
equipped)
(Lane