Cleaning The Machine; Emptying The Waste Water; Removing The Wands And Floor Tool; Cleaning The Tanks And Filters - Numatic NHL 15 Owner's Instructions Manual

Fig 38
Caution.
The solution tube will be under pressure, switch off the pump and operate the trigger to
release the pressure in the system BEFORE removing the solution tube from the
Fig 42

Cleaning the machine

Emptying the waste water

You can empty the waste water tank by using the
dump hose attached to the rear of the machine
(Fig 38).
The waste water tank can also be removed and
carried using the handle to a suitable waste disposal
area and emptied (Fig 39).
Follow the national guide lines when disposing of
chemicals. (COSHH) see page 11
Removing the wands and floor-tool
Fig 40
Cleaning the tanks, filters and hoses.
machine.
Unclip the solution tube from the machine see NOTE above.
Remove the wands, floor-tool (Fig 40)
and hose assembly from the machine (Fig 41).
To keep your NUMATIC machine in pristine condition
Clean all filters and tanks regularly.
Remove the waste tank vacuum filter
(Fig 42) and clean.
16
Fig 39
Fig 41