Table of Contents
Advertisement
Installing the Cisco ASR 907 Router
Step 2
Slide the open end of your 2-hole ground lug over the exposed area of the ground wire.
Step 3
Using a crimping tool (as specified by the ground lug manufacturer), crimp the ground lug to the ground wire as shown
in figure below.
Figure 23: Crimping a Ground Lug onto the Ground Wire
Step 4
Use a Phillips head screwdriver to attach the 2-hole ground lug and wire assembly to the router with the 2 pan-head
Phillips head screws. For a 19-inch EIA rack, attach the 2-hole ground lug to the rear of the router.
Step 5
Connect the other end of the ground wire to a suitable grounding point at your site.
Installing the Fan Tray
The fan tray is a modular unit that provides cooling to the Cisco ASR 907 Router.
Do not introduce body parts or objects in the fan tray slot when installing or removing the fan tray module.
Note
Exposed circuitry is an energy hazard.
Cisco ASR 907 Router Hardware Installation Guide
Installing the Fan Tray
61
Advertisement
Table of Contents
