Safety Precautions - Cisco AIR-PWRINJ1500-2 Installation Instructions Manual

Cisco aironet series power injector
Table of Contents

Advertisement

You can determine whether your equipment is causing interference by turning it off. If the interference
stops, it was probably caused by the Cisco equipment or one of its peripheral devices. If the equipment
causes interference to radio or television reception, try to correct the interference by using one or more
of the following measures:
Modifications to this product not authorized by Cisco Systems, Inc. could void the FCC approval and
negate your authority to operate the product.

Safety Precautions

Translated versions of the following safety warnings are provided in the Safety Warnings document that
ships with the access point and is also available on Cisco.com.
Warning
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this device.
Statement 1071
SAVE THESE INSTRUCTIONS
Warning
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Statement 1001
Warning
Read the installation instructions before connecting the system to the power source. Statement 1004
This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that
Warning
the protective device is rated at not greater than 20A. Statement 1005
Only trained and qualified personnel should be allowed to install, replace, and service this
Warning
equipment. Statement 1030
Ultimate disposal of this product should be handled according to all national laws and regulations.
Warning
Statement 1040
Turn the television or radio antenna until the interference stops.
Move the equipment to one side or the other of the television or radio.
Move the equipment farther away from the television or radio.
Plug the equipment into an outlet that is on a different circuit from the television or radio. (That is,
make certain the equipment and the television or radio are on circuits controlled by different circuit
breakers or fuses.)
Cisco Aironet Series Power Injector AIR-PWRINJ1500-2= Installation Instructions
Safety Precautions
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents