Activate Your Device; Setting Date And Time - A-rival sQan User Manual

Activate Your Device

When you get the a-rival HGBM01, the first thing you must do is to activate it. Please press and hold the SET button "E" to activate it, then it
will enter the setting mode.

Setting Date and Time

Please proceed to time setting before your initial use so as to ensure each piece of record are labled with a time stamp. (Year Range: 2012-
2052; Time Format: 12 Hours)
1. When the monitor is OFF, press and hold "SET" button "E" for 3 seconds to
enter Time Setting Mode.
2. As pictured in the right, the blinking numeral representing [HOUR]. Press
"MEM" button "S" to change the numeral. Each press will increase the numeral
by one in a cycling manner.
3. Press "SET" button "E" again to confirm [HOUR]. Then the numeral
representing [MINUTE] blinks.
10