Advertisement
JH-8013/JH8014 Manual
C. Part function
、
1 Transmitter
AUDIO IN
MIC IN
PAIR
OFF/MONO/STEREO
Power DC 5V
JH-8013A/B
Rear charging bay of B
(only one charging bay for )
A
Front charging bay of B
Charging indicator
、
2 Receiver
VOL
TONE
ON OFF
BAL
CH/MIC
(Balance)
(Bluetooth function button)
Battery case
LINE IN
MIC IN
(
Wired cable jack
)
AUDIO IN
MIC IN
OFF/MONO/STEREO
OPTICAL
PAIR
Power DC 5V
JH-8014A/B
Charging compartment
Working indicator
Wired state indicator
(Red light)
Wireless signal indicator
(Blue light)
07
JH-8013/JH8014 Manual
(7) In order not to disturb others, you can reduce the TV volume or change it to
mute.
Note: the transmitter will be in standby status if there is no signal input in
1 minute and then power off automatically in 5 minutes, and its working
indicator will be off. When you turn the audio source on, the transmitter will
work again. Please turn off the transmitter if you don't use it for a long time.
2. Regular hearing aid function
(1) Plug the
external
microphone cable into the MIC IN socket on the receiver.
Place the microphone near the sound source you want to amplify.
volume on the receiver is set to the lowest,
VOLume, TONE, and BALance to your required levels.
(2) The external microphone can be also clipped on a pocket as shown for
general conversation use.
Note: when th
e external
microphone cable is plugged in, the built-in
microphone will be cut off automatically.
3. Wired headphone with hearing aid function
Plug one end of the wired headphone cable into the LINE IN socket of the
receiver, and connect the other end to the audio source such as a PC, iPAD,
MP3, mobile phone, etc.
Ensure the volume on the receiver is set to the
lowest
, then switch it on and adjust the VOLume, TONE, BALance to your
required levels.
Ensure the
then switch it on and adjust the
BL-8008
12
Advertisement
