Advertisement
JH-8013/JH8014 Manual
E. Set up and user instructions
1. Wireless TV hearing aid function
(1) Connect the power adapter with the transmitter's power jack.
JH-8014
Audio in
(2) Connect the 3.5mm plug of
Audio cable1
connect the lotiform plugs to AUDIO OUT jack of TV, DVD, STB, etc. ( if it is a
computer, you need to connect lotiform plugs with Audio cable2, then connect
the 3.5mm plug of
Audio cable2
to the speaker jack of the computer.) If the TV is
used with a STB, DVD, etc., please prior to connect the transmitter with the
STB, DVD, don't connect to the TV set directly. (
signal for some TVs when connect to them directly
TVs are different .)
Connect to audio out of TV
TV
ANT
L
R
Connect to audio out of DVD
Audio out
JH-8013
Audio in
Power input
Power input
to the transmitter's audio-in jack,
Maybe there isn't audio out
because manufacturers of
Connect to audio out of STB
L
R
Audio out
Connect to audio out of PC
09
JH-8013/JH8014 Manual
If the sound source has a digital audio output, connect the optical socket of the
sound source with the optical fiber cable. (Just for JH-8014A/B only)
DIGITAL AUDIO OUT
OPTICAL
COAXIAL
If the sound source doesn't have any of the audio out jack mentioned above, just
plug the microphone cable into the MIC IN socket of the transmitter, then fix the
microphone on to the audio source's speaker.
(3) Switch on the transmitter, the working indicator will be on. Choose a suitable
place for the transmitter near your sound source (e.g., a TV). Adjust the audio
source
's volume properly
in working status (when the transmitter connected to a
STB, DVD, PC, etc.).
(4) Put the receiver on correctly, with the indicator facing away from your body.
IMPORTANT: make sure the volume on the receiver is set to the lowest to
protect your hearing,
then switch it on, its blue indicator will be on. A
VOLume to a comfy listening level, you will hearing the sound from the
transmitter.
JH 8013
MONO/STEREO
JH 8014
djust the
-
PAIR
-
10
Advertisement
