Advertisement
7. (1)
Note: w
hen insert the receiver or the battery correctly, the indicator on the
transmitter lights up.
Once charging is complete, the light will go out.
The indicator will light up on the transmitter in different status as below:
a) The right indicator is lit blinking red for the model A & B when the transmitter
is switched on.
b) For A model:
Left lit red for only charging the receiver in the charging bay.
Left lit orange
(green & red together)
bay and the Li-ion battery in the compartment at the same time.
Left lit
green
for only charging the Li-ion battery in the compartment.
c) For B model:
Left lit
green
for only charging the receiver in the front charging bay.
Left lit red for only charging the receiver in the rear charging bay.
Left lit orange
(green & red together)
charging bays at the same time.
Left lit
green
for only charging the Li-ion battery in the compartment.
Remark:
Left lit
Note: charging is monitored automatically and charging will stop when the
battery is full. Please allow the battery to run down prior to the first 3
charges.
7. (2)
for charging the receiver in the charging
for charging two receivers in two
Right lit
Both lit
15
(5) Tone control:
Specially designed for hearing impaired people who have different sound
frequency sensitiveness. They can adjust the "TONE" button to find the best
feature, and hear the target audio source clearly.
5. Features
Transmitter part:
(1) Two audio input: a standard 3.5mm audio jack and an equipped MIC standard
3.5mm input jack. (
For JH-8013A/B
Three audio input: a standard 3.5mm audio jack and an equipped MIC standard
3.5mm input jack, a digital optical fiber input jack . (
(2)
Stereo/mono selectable function.
(3)
One transmitter can work with two receivers at the same time.
(4) Two charging solutions: put the receiver directly into the charging bay or put
the battery into the spare battery charging compartment.
(5) Automatically power off function:
When no signal input, it will be powered off in 5 minutes.
(6) Power input: DC 5V, 1000mA
High voltage input automatic protection function: when the power input
exceeds the transmitter capacity, the circuit inside will be cut off to protect
the transmitter from being destroyed.
Receiver part:
(
1) Volume, tone and balance adjustable functions: adjust them to the best sound.
(2) Audio
input function: standard Φ3.5mm stereo jack.
a
(3) Equipped MIC input hearing aid function: standard Φ3.5mm
(
4)
One receiver can work with the transmitter and a mobile phone with the
bluetooth function at the same time.
(5) Automatically mute and power off function:
When no signal received, it will be muted in 1 minute and then powered off
in 5 minutes.
(6) Powered by a removable 3.7V Li-ion battery.
)
For JH-8014A/B
)
a
mono
jack.
04
02
Advertisement
