Removing The Sensor - Freestyle LIBRE PRO Operator's Manual

Daily Graph
The Daily Graph shows the Sensor glucose readings
OK
Daily Graph
(mg/dL)
by day and the Target Glucose Range that is set on
350
250
the Reader . You can change the target glucose range
150
by touching the Options symbol
50
12 6 12 6 12
Screen and selecting Target Range .
am am pm pm am
22 Feb
Wednesday
Notes:
•
If you want the graph to show the current
patient's target range, set their target range before
downloading their data .
•
The graph displays glucose readings up to
350 mg/dL . Glucose readings above 350 mg/dL
are displayed at 350 mg/dL . For sequential
readings above 350 mg/dL, a line is displayed at
350 mg/dL .
24
ART26944_rev-C_manual.indd 24-25

Removing the Sensor

The Sensor automatically stops working and should be removed 14 days
after being started . You should also replace the Sensor if there is any
irritation or discomfort at the application site or if the Reader reports a
problem with the Sensor currently in use .
on the Home
Step
1
2
Discard the used Sensor according to your facility's procedures .
See Maintenance and Disposal section .
Action
Pull up the edge of the adhesive that keeps the
Sensor attached to the skin . Slowly peel away
from the skin in one motion .
Note: Any remaining adhesive residue on the
skin can be removed with warm soapy water or
isopropyl alcohol .
25
9/23/16 9:19 AM