Freestyle Libre 2 Quick Start Manual

Quick Start Guide for
FreeStyle Libre 2 app
A FreeStyle Libre product
●
1
Assemble and Apply Sensor to the back of your upper arm
STEP 1
Select site on back of upper arm.
Do not use other sites as these may
result in inaccurate glucose readings.
Note: Avoid scars, moles, stretch
marks, lumps, and insulin injection
sites. To prevent skin irritation, rotate
sites between applications.
STEP 4
Line up dark mark on Sensor
Applicator with dark mark
on Sensor Pack. On a hard
surface, press down firmly
on Sensor Applicator until it
comes to a stop.
STEP 7
Place Sensor Applicator over site
and push down firmly to apply
Sensor.
Do not push down on
CAUTION:
Sensor Applicator until placed
over prepared site to prevent
unintended results or injury.
Setup Overview
Refer to your User's Manual for full system instructions and information.
iPhone
Download FreeStyle Libre 2
from App Store
Android phone
Download FreeStyle Libre 2
from Google Play Store
Sensor
Pack
Codes on labels
must match
STEP 2
Wash site using a plain soap,
dry, and then clean with alcohol
wipe. Allow site to air dry before
proceeding.
STEP 5
Lift Sensor Applicator out of
Sensor Pack.
STEP 8
Sensor
Gently pull Sensor Applicator
away from your body.
●
1
Assemble and Apply Sensor
to the back of your upper arm
●
2
Set up App
Sensor
Applicator
●
3
Use the App to scan your Sensor
CODE XXX
After the start-up period, you can use
the App to check your glucose
Lid
Peel lid completely off Sensor Pack.
Unscrew cap from Sensor Applicator.
CAUTION:
must match on Sensor Pack
and Sensor Applicator or
glucose readings will be
incorrect.
Sensor Applicator is ready to
apply Sensor.
CAUTION:
now contains a needle. Do not
touch inside Sensor Applicator
or put it back into Sensor Pack.
Make sure Sensor is secure.
Discard used Sensor Applicator
and Sensor Pack according to
local regulations.
STEP 3
Cap
Sensor codes
Sensor Pack | Envase del sensor
Customer Service | Atención al cliente:
1-855-632-8658
CODE
XXX
XXXXXXXXXXX
YYYY-MM-DD
STEP 6
Sensor Applicator
STEP 9