Select Active Shield; Com/Nav; Tcad 9900B Traffic Menu; Traffic Audio - Garmin GTN 725 Pilot's Manual

10.7.2

Select Active Shield

1. While viewing the TCAD display, touch the Active Shield
key to select the Active Shield values (Departure, Enroute, or
Ground).
2. Touch the desired setting to save the values.
10.7.3

TCAD 9900B Traffic Menu

The TCAD 9900B Menu allows control over the settings for the TCAD Traffic
display.
1. While viewing the Traffic page, touch the Menu key.
Set Traffic Audio
Volume
Select Shield Setup
2. Touch the desired key from the menu to make any settings.
10.7.3.1

Traffic Audio

1. While viewing the TCAD Control menu, touch the Traffic
Audio key.
Touch To Lower
The Volume
2. Touch the arrow keys to raise or lower the TCAD Traffic Audio
level. The selected volume will be shown as a percentage value
and graphically with a bar graph.
3. Touch the Back key to return to the TCAD Control menu.
190-01007-03 Rev. C
Figure 10-26 TCAD 9900B Traffic Menu
Bar Graph Showing Volume Level
Figure 10-27 TCAD Traffic Audio
GTN 725/750 Pilot's Guide
Select Approach
Mode: Set,
Armed, or Active
Touch To Raise
The Volume
10-31
Foreword
Getting
Started
Audio &
Xpdr Ctrl

Com/Nav

FPL

Direct-To
Proc
Charts
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
Index