109P The OSD Controls
6) To adjust the horizontal convergence, press the
7) When the horizontal convergence is adjusted, press the
CONVERGENCE.
8) To adjust the vertical convergence, press the
9) When the vertical convergence is adjusted, press the
window. BACK TO MAIN CONTROLS is highlighted.
After returning to EXTRA CONTROLS . . .
. . . to continue to ADJUST PURITY, press the
highlighted. Next, start with step 4 under EXTRA CONTROLS - ADJUST PURITY.
Smart
Note: If you have not degaussed the monitor, please follow the steps under the Extra
Help
Controls - Degauss section of this manual before adjusting the purity.
. . . to exit completely, press the
file:///G|/manual/english/109P/osd/osd_cont.htm (26 of 32) [10/16/1999 6:32:49 AM]
or
button.
button to highlight VERTICAL
or
button.
button to return to the EXTRA CONTROLS
button until ADJUST PURITY is
button twice.