1. Manuals
  2. Brands
  3. Philips Manuals
  4. Monitor
  5. 109B60/05
  6. Electronic user's manual

Philips 109B60/05 Electronic User's Manual

Crt monitor 19" real flat uxga
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
electronic user's manual
file:///D|/EDFU/crt_19_6/edoc/english/109B/manual.html2005-08-10 ¤U¤È 01:03:12

Advertisement

Table of Contents
loading

Related Manuals for Philips 109B60/05

Summary of Contents for Philips 109B60/05

  • Page 1 electronic user's manual file:///D|/EDFU/crt_19_6/edoc/english/109B/manual.html2005-08-10 ¤U¤È 01:03:12...

  • Page 2: Safety And Troubleshooting Information

    Safety & Troubleshooting Safety and Troubleshooting Information Safety Precautions and Maintenance Related Information Safety precautions and maintenance WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. Read and follow these instructions when connecting and using your computer monitor: Disconnect the monitor from the power supply if the monitor is not to be used for an extended period of time.
  • Page 3 Other Documents You May Need About This Guide This electronic user's guide is intended for anyone who uses the Philips Color Monitor. It describes the monitor's features, setup, operation and all other information, which is the same exact information described in our printed version.

  • Page 4: Notational Descriptions

    About This Electronic User's Manual Philips Color Monitor Quick Start Guide which summarizes the steps for setting up the monitor. This is included with this product. Notational Descriptions The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type.
  • Page 5 About This Electronic User's Manual ©2005 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction, copying, usage, modifying, hiring, renting, public performance, transmission and/or broadcasting in whole or in part is prohibited without written consent of Philips Electronics N.V. file:///D|/EDFU/crt_19_6/edoc/english/109B/ABOUT/ABOUT.HTM (3 of 3)2005-08-10 ¤U¤È 01:03:17...

  • Page 6: Product Information

    LightFrame™ for Windows Introduction Philips LightFrame™ feature enriches the experience of pictures and video on a Philips CRT (picture tube) monitor. LightFrame™ will boost the brightness and sharpness of photos and videos on the monitor screen. file:///D|/EDFU/crt_19_6/edoc/english/109B/PRODUCT/PRODUCT.HTM (1 of 11)2005-08-10 ¤U¤È 01:03:19 •...
  • Page 7 It is recommended that you install this software only on a Philips monitor designed to use it. These monitors can be identified by the LightFrame™ logo on the front of the monitor.
  • Page 8 LightFrame™ Q: Is LightFrame™ 2 compatible with LightFrame™ 3? A: No. If you run LightFrame™ 1 or 2 software with a Philips LightFrame™ 3 monitor, nothing will happen. Q:Can I use LightFrame™ 3 software on my LightFrame™ 1 / 2 monitor.
  • Page 9 Q:Can I upgrade my current Philips monitor to LightFrame™ 3? A:No. For LightFrame™ 3 Philips developed special hardware which is build into the monitor. Therefore upgrading from LightFrame™ 1 or 2 to 3 is not possible. It is however possible to upgrade your LightFrame™...
  • Page 10 109B Product Information filters the pictures it finds based on the minimum size of the picture therefore it may happen that some pictures are not enhanced when you open a web page. Q:Can I enhance two or more area’s at the same time? A:Yes.
  • Page 11 A: All Philips LightFrame™ 3 monitors display this logo on their front bezel: Lead-free product Philips eliminated toxic substances like lead from its displays. Lead-free display helps protect your health and promotes environmentally sound recovery and disposal of waste from electrical and electronic equipment.
  • Page 12 109B Product Information • Size and deflection • Dot pitch / Grille pitch • Horizontal pitch • Tube type • Phosphor • Recommended display area • Maximum display area SCANNING • Horizontal scanning • Vertical scanning VIDEO • Video dot rate •...
  • Page 13 Using a standard unified color space, sRGB will help represent pictures taken by an sRGB compatible device correctly on your sRGB enabled Philips monitors. In that way, the colors are calibrated and you can rely on the correctness of the colors shown on your screen.
  • Page 14 The 15-pin D-sub connector (male) of the signal cable (IBM systems): file:///D|/EDFU/crt_19_6/edoc/english/109B/PRODUCT/PRODUCT.HTM (9 of 11)2005-08-10 ¤U¤È 01:03:19 < 1W ® compliant. s an NERGY ® NERGY guidelines for energy efficiency. RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE ® PHILIPS artner, ° , full white pattern.
  • Page 15 109B Product Information Assignment Red video input Green video input Blue video input Identical output - connected to pin 10 Ground Red video ground Green video ground Blue video ground Views Follow the links to see various views of the monitor and its components. Front View Rear View file:///D|/EDFU/crt_19_6/edoc/english/109B/PRODUCT/PRODUCT.HTM (10 of 11)2005-08-10 ¤U¤È...
  • Page 16 109B Product Information file:///D|/EDFU/crt_19_6/edoc/english/109B/PRODUCT/PRODUCT.HTM (11 of 11)2005-08-10 ¤U¤È 01:03:19...

  • Page 17: Installing Your Monitor

    Installing your Monitor Installing your Monitor Front View • Rear View Front View Power button switches your monitor on. OK button which when pressed will take you to the OSD controls Contrast hotkey. When the "-" button is pressed, the adjustment controls for the CONTRAST will show up.

  • Page 18: Rear View

    Installing your Monitor "-" and "+" buttons, are used for adjusting the OSD of your monitor. RETURN TO TOP OF THE PAGE Rear View file:///D|/EDFU/crt_19_6/edoc/english/install_6/install.htm (2 of 3)2005-08-10 ¤U¤È 01:03:20...
  • Page 19 Installing your Monitor 1. Power in - attach power cable here. 2. Video In - this is a cable which is already attached to your monitor. Connect the other end of the cable to your PC. file:///D|/EDFU/crt_19_6/edoc/english/install_6/install.htm (3 of 3)2005-08-10 ¤U¤È 01:03:20 RETURN TO TOP OF THE PAGE...

  • Page 20: Description Of The On-Screen Display

    Description of the On Screen Display What is the On-Screen Display? This is a feature in all Philips monitors which allows an end-user to adjust screen performance of monitors directly through an on-screen instruction window. The user interface provides user- friendliness and ease-of-use when operating the monitor.
  • Page 21 On-Screen Display The OSD Tree Below is an overall view of the structure of the On-Screen Display. You can use this as reference when you want to later on work your way around the different adjustments. Your monitor may not include all the items in the OSD tree shown below. file:///D|/EDFU/crt_19_6/edoc/english/OSD_3/OSDDESC.HTM (2 of 4)2005-08-10 ¤U¤È...
  • Page 22 On-Screen Display file:///D|/EDFU/crt_19_6/edoc/english/OSD_3/OSDDESC.HTM (3 of 4)2005-08-10 ¤U¤È 01:03:20...
  • Page 23 On-Screen Display RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_19_6/edoc/english/OSD_3/OSDDESC.HTM (4 of 4)2005-08-10 ¤U¤È 01:03:20...

  • Page 24: Customer Care And Warranty

    Customer Care and Warranty Customer Care & Warranty PLEASE SELECT YOUR COUNTRY/AREA TO READ THE WARRANTY COVERED: WESTERN EUROPE: Austria • Belgium • Cyprus • Denmark • France • Germany • Greece • Finland • Ireland • Italy • Luxembourg • the Netherlands • Norway • Portugal • Sweden • Switzerland •...

  • Page 25: Frequently Asked Questions

    Increasingly, monitors include USB hub functionality. But not all users need or want a USB hub. To give users freedom of choice, Philips provides an optional USB hub (type number PCUH411). The USB hub consists of two parts that are normally connected: one is functional, the other aesthetic.
  • Page 26 Frequently Asked Questions What models are Mac compatible? All listed Philips monitors are Mac compatible. BUT, you may need an adapter to connect the monitor to your Mac system. Please contact your dealer/reseller for details. What is TCO? TCO is a Swedish abbreviation for the Swedish Confederation of Professional Employees.
  • Page 27 Frequently Asked Questions TCO95: Further toughened TCO92 rules. TCO99: Delineated even more severe standards and test procedures than TCO95. TCO'03: Same as TCO99 standard + Testing uncertainty. Safety: MPRII: No requirement. TCO92/95/99/03: All set requirements. Energy Saving: MPRII: No requirement. TCO92: Standby mode <...
  • Page 28 Go to 'My Computer' and select 'Control Panel' followed by 'Monitor Control.' Select "All default selection' and choose your Philips monitor model from the default driver list. Plug and Play will automatically enable the EPA tick box for you. In DOS or Windows 3.1, you must first make sure your PC supports power saving.
  • Page 29 Simply press OK button then select "Reset to factory settings" to restore all settings. 16. What is LightFrame ? LightFrame is a Philips technology breakthrough which offers a unique and revolutionary solution for boosting a monitor 's brightness and sharpness. With LightFrame experiences TV quality performance for video or photos without deterioration to the monitor 's performance in windows used for other applications.
  • Page 30 18. Why is LightFrame important to me? With LightFrame , selected Philips monitors deliver TV quality video and photo display while maintaining monitor performance for text-based applications. The result is that movies and other video are brighter and livelier; photos are more vibrant and lifelike.
  • Page 31 21. I get a message warning that my monitor 'may not support LightFrame '. I am certain my monitor does. What is wrong? Only a Philips driver can determine if your monitor is equipped with LightFrame ; a generic Windows driver cannot. Install the special Philips driver that came with your monitor. If the warning continues to flash after your Philips driver is installed, ignore the message.
  • Page 32 25. What is Philips monitors' solution for audio? Not all users need multimedia capabilities. To give users freedom of choice, Philips provides an optional Multimedia Base (type number: 6G3B10). The Multimedia Base replaces the easily removable standard pedestal of the monitor.
  • Page 33 Only the monitor's height is increased by only 3 centimeters. 29. Where can I buy a multimedia base to incorporate with my Philips monitor? Please contact your dealer/reseller for details.
  • Page 34 Auto Calibration takes place when a monitor receives a signal indicating an imminent switch to its sleep mode/stand-by mode. 34. Which models of Philips monitors are equipped with Auto Calibrate feature? Auto Calibrate is currently available in the new 201P, 201B and 109P.
  • Page 35 Change horizontal and vertical size to optimize the reduction of the Moire effect. 39. What is CustoMax? CustoMax is proprietary Philips software that allows user to control parameter (e.g. Size, Color, Geometry) in place of the buttons on the front of the monitor. To install and run the CustoMax software, you must have a USB compatible system and have a USB connection at the rear of your monitor.
  • Page 36 Philips monitors. Please be aware that not all models in the Philips range has this manual degauss function. Some models are built with an auto degauss feature which automatically degausses the monitor when it is switched on.
  • Page 37 Set the Contrast to maximum level (100) and Brightness to middle level (50) Video card could be defective (try the monitor with another computer) 45. I have noticed two thin horizontal lines on the screen of my Philips monitor. Is this normal? file:///D|/EDFU/crt_19_6/edoc/english/faq.htm (13 of 15)2005-08-10 ¤U¤È 01:03:23...
  • Page 38 Frequently Asked Questions This phenomenon can occur with Philips 107P, 109P and 201P monitors and is normal. Your monitor is using an Aperture Grille, which consists of fine vertical wires to align the electron beams with the phosphors on the screen. To prevent these vertical wires from vibrating and to keep them properly aligned with the picture tube, two horizontal damper wires are required.
  • Page 39 50. Why does the picture disappear after I press the on/off button quickly? This is a unique Philips feature designed to preserve the life of your monitor. Please allow 5 seconds between powering off and on your monitor, your picture will then be restored.
  • Page 40 L M N O P Autoscan A microprocessor-based feature of Philips Brilliance monitors is able to detect automatically horizontal and vertical frequencies of input signals with those of the installed video card. An autoscan monitor can thus operate with a wide range of video cards. MultiSync, a registered trademark of NEC, provides a similar function.

  • Page 41: Color Temperature

    A way of describing the color of a radiating source in terms of the temperature (in degrees Kelvin) of a black body radiating with the same dominant frequency as the source. Most Philips monitors offer the possibility of setting the color temperature to any desired value. Contrast The ratio between the brightness of the brightest and darkest parts of a picture.
  • Page 42 Glossary a picture is set by the brightness of the unexcited phosphor, which is governed by the degree with which ambient light is reflected. Contrast is therefore reduced in conditions of high ambient light levels. Black Matrix tubes reflect less ambient light so exhibit higher contrast than other tubes. Convergence error Bean misalignment causing one or more of the three beams passing through the wrong aperture in the shadow mask and striking a phosphor dot in the wrong triad.
  • Page 43 Glossary Cathode-ray tube - the general term for all tubes in which one or more electron beams emitted by a cathode are periodically scanned across a phosphor screen by means of deflection circuitry. A special form of the cathode-ray tube is the TV and monitor picture tube. DDC (Display Data Channel) DDC is a communication channel for displays and computers.

  • Page 44: Digital Control

    This is a very advanced feature that allows the user to switch to any required mode at any instant without having to spend time readjusting the picture. It is currently available in most Philips monitors. Dot pitch The shortest distance between two phosphor dots of the same color on the screen.
  • Page 45 Glossary Dot rate Frequency in MHz of the dot clock. It is a measure of the speed with which data is transferred between the video card and subsequent processing circuitry. Also known as video dot rate. Electromagnetic radiation standards International standards set to limit electromagnetic emissions from monitors. There are currently file:///D|/EDFU/crt_19_6/edoc/english/GLOSSARY/GLOSSARY.HTM (6 of 22)2005-08-10 ¤U¤È...
  • Page 46 Glossary two important standards both derived from regulations originally laid down by Swedish authorities. MPR-II The standard originally proposed by the Swedish National Board of Measurement and Testing. It set maximum levels of electromagnetic radiation emitted by monitors, and has now been adopted as a world standard.
  • Page 47 Glossary problem can, however, be eliminated by increasing the refresh rate (number of frames/second) of the monitor to a value above around 70 Hz. Sensitivity to flicker appears to diminish with increasing age. Hertz The unit of frequency named after the physicist Heinrich Hertz (1857-1894). 1 hertz (Hz) is equal to 1 cycle/second.
  • Page 48 Glossary INF file (Information File) Information (INF) files store information in a specific format. The set-up functions retrieve information from the INF file to use when performing installation operations. Examples of the type of information stored in an INF file include INI and registry changes, file names, and locations of the source files on source media.

  • Page 49: Line Frequency

    Glossary Linearity The degree to measure the actual location of a pixel on the screen corresponds with its intended location. ( see figure ) Line frequency See Horizontal scanning frequency. Low-emission monitor A monitor that complies with international standards on radiation. See Electromagnetic radiation standards.
  • Page 50 Glossary Alternating fields generated by the deflection yoke. These are subject to increasing attention, notably by governing authorities, the trade and the press. Although there is no scientific evidence that monitor emissions are harmful, much effort has gone into reducing emissions on the principle of better safe than sorry.
  • Page 51 Glossary Non-interlaced See Interlaced/non-interlaced. OSD (On Screen Display) The feature that allows an end user to adjust screen performance and parameters of monitors directly through an on-screen instruction window. See CustoMax in CrystalClear section. Overscan The practice in which areas without useful video information are scanned outside the visible screen area in order to make maximum use of the screen for display of active video information.
  • Page 52 Glossary Parallelogram Distortion See Geometric distortion. Phosphor Generic name for the class of substances that exhibit luminescence. To produce a picture on screen, phosphors are deposited on the inner surface of the picture-tube screen and excited into luminescence by the electron beam. Typical examples of phosphors are P22 medium short- persistence phosphor and EBU high-color-saturation phosphor.
  • Page 53 Glossary Plug-and-Play See DDC. See USB section. Raster The area on screen that electron beam can reach. Refresh rate See Vertical scanning frequency. Resolution The number of pixels that can be displayed on the screen. The resolution is specified as the number of pixels in a line multiplied by the number of horizontal lines.
  • Page 54 Glossary Screen coatings Anti-Static coatings Due to bombardment by beam electrons, monitor screens become electrically charged when in use. Electrically charged screens surfaces can attract dust particles. An Anti-Static coating is a conductive coating deposited on the screen (or on a glass panel immediately in front of the screen) that conducts away the charge and prevents screen dust build-up.

  • Page 55: Self-Test Function

    Glossary ARAS is one of the most effective anti-reflection/anti-static screen treatments currently available. It is composed of a multi-layer structure of transparent dielectric material that suppresses specular reflections by broadband interference effects at the screen surface. Anti-static properties are provided by a single conductive layer within the multi-layer structure. With ARAS, the intensity of reflected light is reduced from around 4.5% of the incident light (the reflectivity of uncoated screens) to less than 0.5%.
  • Page 56 Glossary common: SOG (Synchronization On Green) A properly functioning color monitor requires five kinds of signals: horizontal sync pulse, vertical sync pulse, red color signal, green color signal and blue color signal. Signals from a PC are transmitted to a monitor using one of three methods: 1.

  • Page 57: Tilt Function

    Glossary See Electromagnetic radiation standards. Tilt function See rotation function. Trapezoid distortion See Geometrical distortion. TTL signal A TTL (Transistor-transistor-logic) signal is a digital signal level for controlling the screen colors. With TTL driving, the red, green and blue signals can only be switched on or off or provided with an intensity signal.
  • Page 58 Glossary USB eliminates "case angst" -- the fear of removing the computer case to install add-on peripherals. And USB also eliminates adjustment of complicated IRQ settings when installing new peripherals. USB does away with "port gridlock." Without USB, PCs are normally limited to one printer, two Com port devices (usually a mouse and modem), one Enhanced Parallel Port add-on (scanner or video camera, for example) and a joystick.
  • Page 59 Glossary for example, a data/FAX modem device. Devices may be physical, electrical, addressable, and logical. Downstream The direction of data flow from the host or away from the host. A downstream port is the port on a hub electrically farthest from the host that generates downstream data traffic from the hub. Downstream ports receive upstream data traffic.
  • Page 60 Glossary Vertical dot pitch See Dot pitch. Vertical scanning frequency Expressed in Hz, this is the number of fields written to the screen every second in interlaced mode. In non-interlaced mode vertical scanning frequency is the number of frames (complete pictures) written to the screen every second (also known as refresh rate).
  • Page 61 Glossary A card equipped with a character or graphic generator and video memory, which maps to the screen. A microprocessor scans video memory and translates bit information from the computer into displayable video signals for the monitor. These cards comply with various standards that determine the nature and quality of the display.

  • Page 62: Download And Print

    Download and Print Download and Print This page provides an option to read the manual in .pdf format. PDF files can be downloaded into your hard disk, then viewed and printed with Acrobat Reader or through your browser. If you do not have Adobe¨ Acrobat Reader installed, click on the link to install the application. Adobe®...
  • Page 63 Download and Print file:///D|/EDFU/crt_19_6/edoc/english/DOWNLOAD/DOWNLOAD.HTM (2 of 2)2005-08-10 ¤U¤È 01:03:25...

  • Page 64: Troubleshooting

    Troubleshooting Troubleshooting Safety Precautions and Maintenance • Other Related Information Common Problems Having trouble? Something not working? Before calling for help, try these suggestions. Having this problem? No Picture (Power LED not lit) No Picture (Power LED is flashing green) No Picture (Power LED is green) Screen doesn't show...
  • Page 65 Troubleshooting No color or intermittent color Color appears blotchy Missing one or more colors Dim Picture Picture is too large or too small. Edges of the picture are not square. Picture has a double image. Picture is not sharp. Unstable Picture Problem with On Screen Display file:///D|/EDFU/crt_19_6/edoc/english/109B/SAFETY/saf_troub.htm (2 of 3)2005-08-10 ¤U¤È...
  • Page 66 Troubleshooting For further assistance, refer to the distributor. file:///D|/EDFU/crt_19_6/edoc/english/109B/SAFETY/saf_troub.htm (3 of 3)2005-08-10 ¤U¤È 01:03:43 Consumer Information Centers RETURN TO TOP OF THE PAGE list to contact your local Philips...

  • Page 67: Regulatory Information

    (1 of 15)2005-08-10 ¤U¤È 01:03:45 • • Federal Communications Commission (FCC) Notice (U.S. Only) • MIC Notice (South Korea Only) • North Europe Information (Nordic Countries) • Philips End-of-Life Disposal • Troubleshooting • Other Related Information TCO'03 Information • Recycling •...
  • Page 68 Regulatory Information What does labeling involve? This product meets the requirements for the TCO' 99 scheme which provides for international and environmental labeling of personal computers. The labeling scheme was developed as a joint effort by the TCO (The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen (The Swedish Society for Nature Conservation) and Statens Energimyndighet (The Swedish National Energy Administration).
  • Page 69 Regulatory Information Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant substances.
  • Page 70 Regulatory Information TCO' 03 Information (For TCO Model Only) Congratulations! The display you have just purchased carries the TCO'03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment.
  • Page 71 Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in national take-back initiatives and recycling programs whenever possible, preferably in cooperation with competitors.
  • Page 72 CE Declaration of Conformity Philips Consumer Electronics declare under our responsibility that the product is in conformity with the following standards - EN60950-1:2001 (Safety requirement of Information Technology Equipment)
  • Page 73 NERGY NERGY We recommend you switch off the monitor when it is not in use for quite a long time. file:///D|/EDFU/crt_19_6/edoc/english/109B/SAFETY/REGS/regulat.htm (7 of 15)2005-08-10 ¤U¤È 01:03:45 RETURN TO TOP OF THE PAGE PHILIPS 109B6* LED Indicator Green Flashing Green ®...
  • Page 74 Regulatory Information Federal Communications Commission (FCC) Notice (U.S. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 75 Regulatory Information Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de class B,aux termes de l'article 15 Des règles de la FCC. Ces limites sont conçues de façon à fourir une protection raisonnable contre les interférences nuisibles dans le cadre d'une installation résidentielle.
  • Page 76 Regulatory Information VCCI Notice (Japan Only) This is a Class B product based on the standard of the Voluntary Control Council for Interference (VCCI) for Information technology equipment. If this equipment is used near a radio or television receiver in a domestic environment, it may cause radio Interference.
  • Page 77 Regulatory Information Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source.
  • Page 78 Regulatory Information North Europe Information (Nordic Countries) Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ...
  • Page 79 Regulatory Information BSMI Notice (Taiwan Only) Ergonomie Hinweis (nur Deutschland) Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor Schäden durch Röntgenstrahlen" festgelegten Vorschriften. Auf der Rückwand des Gerätes befindet sich ein Aufkleber, der auf die Unbedenklichkeit der Inbetriebnahme hinweist, da die Vorschriften über die Bauart von Störstrahlern nach Anlage III ¤...
  • Page 80 Regulatory Information Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer. Information for UK only file:///D|/EDFU/crt_19_6/edoc/english/109B/SAFETY/REGS/regulat.htm (14 of 15)2005-08-10 ¤U¤È 01:03:45 RETURN TO TOP OF THE PAGE WARNING - THIS APPLIANCE MUST BE EARTHED.
  • Page 81 Regulatory Information file:///D|/EDFU/crt_19_6/edoc/english/109B/SAFETY/REGS/regulat.htm (15 of 15)2005-08-10 ¤U¤È 01:03:45 BROWN - "LIVE" ("L") GREEN & YELLOW - "EARTH" ("E") 1. The GREEN AND YELLOW wire must be connected to the terminal in the plug which is marked with the letter "E" or by the Earth symbol or coloured GREEN or GREEN AND YELLOW.

  • Page 82: Other Related Information

    Other Related Information Other Related Information Safety Precautions and Maintenance Information for Users in the U. Information for Users in the U. S. For units set at 115 V : Use a UL Listed Cord Set consisting of a minimum 18 AWG, Type SVT or SJT three conductor cord a maximum of 15-feet long and a parallel blade, grounding type attachment plug rated 15 A, 125 V.
  • Page 83 The OSD Controls The OSD Controls Description of the On-Screen Display The OSD Controls : Brightness (HotKey) Horizontal • Adjust Vertical Controls • Close Main Controls BRIGHTNESS To adjust your screen's brightness, follow the steps below. Brightness is the overall intensity of the light coming from the screen.
  • Page 84 The OSD Controls To adjust your screen's contrast, follow the steps bellow. Contrast is the difference between the light and dark areas on the screen. A 100% contrast is recommended. 1) Press the button on the monitor. The CONTRAST window appears. 2) Press the button to adjust the contrast.
  • Page 85 The OSD Controls 3) Press the button until the desired language is highlighted. 4) Press the button to confirm your selection and return to MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted. file:///D|/EDFU/crt_19_6/edoc/english/OSD_3/OSD_CONT.HTM (3 of 26)2005-08-10 ¤U¤È 01:03:57 RETURN TO TOP OF THE PAGE...
  • Page 86 The OSD Controls ZOOM ZOOM increases or decreases the size of the images on your screen. To adjust the ZOOM follow the steps below. 1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until ZOOM is highlighted. 3) Press the button.
  • Page 87 The OSD Controls 5) Press the button to confirm your selection and Press CONTROLS window. CLOSE MAIN CONTROLS will be highlighted. ADJUST HORIZONTAL ADJUST POSITION under ADJUST HORIZONTAL shifts the image on your screen either to the left or right. Use this feature if your image does not appear centered. ADJUST SIZE under ADJUST HORIZONTAL expands or controls the image on your screen, pushing it out toward the left and right sides or pulling it in toward the center.
  • Page 88 The OSD Controls 4) Press the button to move the image to the left or right. 5) When the position is adjusted, press the press to confirm. 6) To adjust the horizontal size, press the 7) When the size is adjusted, press the CNTROLS sindow.
  • Page 89 The OSD Controls ADJUST VERTICAL ADJUST POSITION under ADJUST VERTICAL shifts the image on your screen either up or down. Use this feature if your image does not appear centered. ADJUST SIZE under ADJUST VERTICAL expands or controls the image on your screen, pushing it out toward the top or bottom or pulling it in toward the center.
  • Page 90 The OSD Controls 4) Press the button to move the image up or down. 5) When the position is adjusted, press the CONTROLS window, or press the 6) To adjust the vertical size, press the 7) When the size is adjusted, press the CONTROLS window.
  • Page 91 The OSD Controls ADJUST SHAPE ADJUST SIDE CURVE ADJUST SIDE CURVE under ADJUST SHAPE allows you to adjust two of the five preset options. These two options are PINCUSHION and BALANCED pincushion. Note: use these features only when the picture is not square. 1) Press the button on the monitor.
  • Page 92 The OSD Controls 4) Press the button. The SIDE CURVE window appears. PINCUSHION should be highlighted. Press to confirm. 5) To adjust the pincushion, press the 6) When the pincushion is adjusted, press the confirm. file:///D|/EDFU/crt_19_6/edoc/english/OSD_3/OSD_CONT.HTM (10 of 26)2005-08-10 ¤U¤È 01:03:57 button,press the button to highlight BALANCED.
  • Page 93 The OSD Controls 7) To adjust the balanced pincushion, press the 8) When the balanced pincushion is adjusted, press the SHAPE window. BACK TO MAIN WINDOWS will be highlighted. 9) Press the button to return to the MAIN CONTROLS window, or press the ADJUST SIDE ANGLES is highlighted.
  • Page 94 The OSD Controls 3) Press the button. The ADJUST SHAPE window appears. ADJUST SIDE CURVE should be highlighted. 4) Press the button to highlight ADJUST SIDE ANGLES. 5) Press the button. The SIDE ANGLES window appears. TRAPEZOID should be highlighted, press to confirm.
  • Page 95 The OSD Controls 6) To adjust the trapezoid, press the 7) When the trapezoid is adjusted, press the PARALLELOGRAM, press 8) To adjust the parallelogram, highlight parallelogram then button to adjust.. 9) When the parallelogram is adjusted, press the the ADJUST SHAPE window. BACK TO MAIN WINDOWS will be highlighted. file:///D|/EDFU/crt_19_6/edoc/english/OSD_3/OSD_CONT.HTM (13 of 26)2005-08-10 ¤U¤È...
  • Page 96 The OSD Controls 10) Press the button to return to the MAIN CONTROLS window, or press the ROTATE IMAGE is highlighted. ROTATE IMAGE (Not available in all models) ROTATE IMAGE under ADJUST SHAPE allows you to adjust one of the five preset options. These two options are PINCUSHION and BALANCED pincushion.
  • Page 97 The OSD Controls 5) Press the button. The ROTATE IMAGE window appears. ROTATE should be highlighted. 6) To adjust the rotation, press the 7) When the rotation is adjusted, press the ADJUST SHAPE window. BACK TO MAIN CONTROLS should be highlighted. 8) Press the button to return to MAIN CONTROLS.
  • Page 98 The OSD Controls projects such as desktop publishing, viewing a DVD from your DVD player or pictures on the World Wide Web, and playing video games. The third option is for PHOTO RETOUCH, which is for working with pictures you have imported into your computer and want to alter. When you select one of these options, the monitor automatically adjusts itself to that option.
  • Page 99 The OSD Controls 4) Press the button to highlight 9300K for GENERAL USE, 6500K for IMAGE MANAGEMENT, 5500K for PHOTO RETOUCH, or USER PRESET. 5) Once you have highlighted GENERAL USE, IMAGE MANAGEMENT, or PHOTO RETOUCH, press the button to confirm you selection. Press window.
  • Page 100 The OSD Controls 6b) When finished with RED, press press to confirm.Next, press the 6c) When finished GREEN, press to confirm. Next, press the 6d) When all adjustments are complete, press the return to the MAIN CONTROLS window. CLOSE MAIN CONTROLS will be highlighted. RESET TO FACTORY SETTINGS RESET TO FACTORY SETTINGS returns everything in all the windows to factory presets.
  • Page 101 The OSD Controls 3) Press the button. The RESET TO FACTORY SETTINGS window appears. 4) Press the button to select YES or NO. NO is the default. YES returns all settings to their original factory adjustments. 5) Press the button to confirm your selection and press CONTROLS window.
  • Page 102 The OSD Controls DEGAUSS EXTRA CONTROLS is a set of three features, including DEGAUSS. Degaussing removes electromagnetic build up that may distort the color on your screen. 1) Press the button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until EXTRA CONTROLS is highlighted.
  • Page 103 The OSD Controls 5) To degauss your screen, press the CONTROLS window will reappear. CLOSE MAIN CONTROLS will be highlighted. ADJUST MOIRE (Not available in all models) EXTRA CONTROLS is a set of three features, including ADJUST MOIRE. Moire is a fringe pattern arising from the interference between two superimposed line patterns.
  • Page 104 The OSD Controls 3) Press the button. The EXTRA CONTROLS window appears. ADJUST MOIRE will be highlighted. 4) Press the button. The ADJUST MOIRE window appears. HORIZONTAL will be highlighted, press to confirm. file:///D|/EDFU/crt_19_6/edoc/english/OSD_3/OSD_CONT.HTM (22 of 26)2005-08-10 ¤U¤È 01:03:57...
  • Page 105 The OSD Controls 5) To adjust the horizontal moire, press the 6) When the horizontal moire is adjusted, press VERTICAL. 7) To adjust the vertical moire, press 8) When the vertical moire is adjusted, press the the EXTRA CONTROLS window. BACK TO MAIN CONTROLS will be highlighted. Turn on LightFrame (Not available in all models) file:///D|/EDFU/crt_19_6/edoc/english/OSD_3/OSD_CONT.HTM (23 of 26)2005-08-10 ¤U¤È...
  • Page 106 The OSD Controls EXTRA CONTROLS is a set of three features, including LIGHTFRAME. This feature allows the user to turn on the LIGHTFRAME function to activate in full screen mode. 1) Press button on the monitor. The MAIN CONTROLS window appears. 2) Press the button until EXTRA CONTROLS is highlight.
  • Page 107 The OSD Controls 5) Pess the button. LIGHTFRAME will be activated. 6) Press button to go back to MAIN CONTROLS. Press CLOSE MAIN CONTROLS file:///D|/EDFU/crt_19_6/edoc/english/OSD_3/OSD_CONT.HTM (25 of 26)2005-08-10 ¤U¤È 01:03:57 RETURN TO TOP OF THE PAGE button again to exit the OSD.
  • Page 108 The OSD Controls RETURN TO TOP OF THE PAGE file:///D|/EDFU/crt_19_6/edoc/english/OSD_3/OSD_CONT.HTM (26 of 26)2005-08-10 ¤U¤È 01:03:57...
  • Page 109 Philips helpdesk directly to benefit from your Philips F1rst Choice Warranty. This three-year service warranty entitles you to a swap model on-site if your monitor turns out to be faulty or defective.Philips aims at a swap within 48 hours of your call being received.
  • Page 110 Note that products that are not originally designed, manufactured, approved and/or authorized for usage within the Philips F1rst Choice countries, do not apply to the Philips F1rst Choice Warranty. In these cases the Philips global warranty terms are valid.
  • Page 111 The full address to which the faulty monitor has to be collected and the swap model should be delivered. Philips' customer help desks are located worldwide. Click here to access the Information. Or you can reach us via: Website: http://www.philips.com/support...
  • Page 112 Your Guarantee in Central and Eastern Europe Dear Customer, Thank you for purchasing this Philips product, which has been designed and manufactured to the highest quality standards. If, unfortunately, something should go wrong with this product Philips guarantees free of charge labor and replacement parts during a period of 36 months from date of purchase.
  • Page 113 In order to avoid unnecessary inconvenience, we advise you to read the operating instructions carefully before contacting our dealers or Information Centers In case your Philips product is not working correctly or is defective, please contact your Philips dealer or directly the Philips Service and Consumer Information Website:www.philips.com/support...

  • Page 114: Your International Guarantee

    In the event you require service whilst in another country a dealer address can be given to you by the Philips Consumer Help Desk in that country, the telephone and fax number of which can be found in the relevant part of this booklet.
  • Page 115 International Guarantee http://www.philips.com Website: file:///D|/EDFU/crt_19_6/edoc/english/warranty/WAR_INTL.HTM (2 of 2)2005-08-10 ¤U¤È 01:04:02...
  • Page 116 Should you encounter any difficulties while installing or using this product, please contact Philips directly to benefit from your Philips F1rst Choice Warranty. This three-year service warranty entitles you to a swap model on-site within 48 hours of your call being received within the first year of purchase.
  • Page 117 Where IS SERVICE AVAILABLE? Warranty service is available in all countries where the product is officially distributed by Philips Consumer Electronics. In countries where Philips Consumer Electronics does not distribute the product, the local Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are not readily available).
  • Page 118 Please contact Philips at: (800) 479-6696 Three years free parts and three years free labor will be provided at Philips Canada depot or any one of its authorized service centers. (In Canada, this warranty is given in lieu of all other warranties. No other warranties are expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose.
  • Page 119 United States Guarantee This warranty gives you specific legal rights. You may have other rights which vary from state/ province to state/province. Before contacting Philips, please prepare the following details so we can solve your problem quickly. Philips type number...

  • Page 120: F1Rst Choice Contact Information

    F1rst Choice Contact Information F1rst Choice Contact Information Country Austria Belgium Cyprus Denmark Finland France Germany Greece Ireland Italy Luxembourg The Netherlands Norway Portugal Spain Sweden Switzerland United Kingdom file:///D|/EDFU/crt_19_6/edoc/english/warranty/WARFIRST.HTM2005-08-10 ¤U¤È 01:04:18 Telephone number 0820 901115 070 253 010 800 92256 3525 8761 09 2290 1908 08 9165 0006...

  • Page 121: Consumer Information Centers

    Consumer Information Centers Consumer Information Centers Antilles • Argentina • Australia China • Colombia • Croatia India• Indonesia • Korea • • Pakistan • Paraguay • Peru • Singapore • Slovakia • Slovenia Ukraine • Venezuela Eastern Europe BELARUS Technical Centre of JV IBA M.
  • Page 122 Consumer Information Centers CROATIA Renoprom d.o.o. Mlinska 5, Strmec HR - 41430 Samobor +385 1 333 0974 ESTONIA FUJITSU SERVICES OU Akadeemia tee 21G EE-12618 Tallinn Tel: +372 6519900 www.ee.invia.fujitsu.com HUNGARY Serware Szerviz Vizimolnár u. 2-4 HU - 1031 Budapest Tel: +36 1 2426331 Email: inbox@serware.hu www.serware.hu...
  • Page 123 Consumer Information Centers ROMANIA Blue Ridge Int'l Computers SRL 115, Mihai Eminescu St., Sector 2 RO - 020074 Bucharest Tel.:+40 21 2101969 SERBIA&MONTENEGRO Tehnicom Service d.o.o. Bulevar Vojvode Misica 37B YU – 11000 Belgrade Tel: +381 11 3060 886 SLOVAKIA Datalan Servisne Stredisko Puchovska 8 SK - 831 06 Bratislava...
  • Page 124 Comel Shevchenko street 32 UA - 49030 Dnepropetrovsk Tel: +380 562320045 www.csp-comel.com Latin America ANTILLES Philips Antillana N.V.Kaminda A.J.E. Kusters 4 Zeelandia, P.O. box 3523-3051 Willemstad, Curacao Phone: (09)-4612799 Fax : (09)-4612772 ARGENTINA Vedia 3892 Capital Federal CP:1430 Buenos Aires Phone/Fax: (011)-4544 2047 file:///D|/EDFU/crt_19_6/edoc/english/warranty/WARCIC.HTM (4 of 12)2005-08-10 ¤U¤È...
  • Page 125 Consumer Information Centers BRASIL Philips da Amazonia Ind. Elet.Ltda. Rua Verbo Divino, 1400 -Sao Paulo-SP CEP-04719-002 -São Paulo & 0800-701-0203 - Other Regions without São Paulo City. Phone: 11 2121 0203 CHILE Philips Chilena S.A. Avenida Santa Maria 0760 P.O. box 2687Santiago de Chile...
  • Page 126 Rambla O'Higgins 5303 Montevideo Uruguay Phone: (598)-619 66 66 Fax : (598)-619 77 77 Customer Desk: Phone: 0004054176 VENEZUELA Industrias Venezolanas Philips S.A. Apartado Postal 1167 Caracas 1010-A Phone: (02) 2377575 Fax : (02) 2376420 Canada CANADA Philips Electronics Ltd.
  • Page 127 Level 1, 65 Epping Rd North Ryde NSW 2113 Phone: 1300 363 391 Fax:+61 2 9947 0063 NEW ZEALAND Philips New Zealand Ltd. Consumer Help Desk 2 Wagener Place, Mt.Albert P.O. box 1041 Auckland Phone: 0800 477 999 (Toll Free)
  • Page 128 Consumer Information Centers HONG KONG Philips Electronics Hong Kong Limited Consumer Service Unit A, 10/F. Park Sun Building 103-107 Wo Yi Hop Road Kwai Chung, N.T. Hong Kong Phone: (852) 2619-9663 Fax: (852) 2481 5847 INDIA Phone: (020)-712 2048 ext 2765...
  • Page 129 Consumer Information Centers INDONESIA Philips Group of Companies in Indonesia Consumer Information Centre Jl.Buncit Raya Kav. 99-100 12510 Jakarta Phone: (021)-7940040 Ext 2100 Fax : (021)-7947511 / 7947539 KOREA Philips Korea Ltd. Philips House C.P.O. box 3680 260-199, Itaewon-Dong. Yongsan-Ku, Seoul 140-202...
  • Page 130 Consumer Electronics 48F PBCOM Tower 6795 Ayala Avenue cor VA Rufino St. Salcedo Village 1227 Makati City, PHILS Phone: (02)-888 0572 , Domestic Toll Free:1-800-10-PHILIPS or 1-800-10-744 5477 Fax:(02)-888 0571 SINGAPORE Accord Customer Care Solutions Ltd Authorized Philips Service Center...
  • Page 131 Consumer Information Centers THAILAND Philips Electronics Thailand Ltd. 26-28th floor, Thai Summit Tower 1768 New Petchburi Road Khwaeng Bangkapi, Khet Huaykhwang Bangkok 10320 Thailand Phone : (66) 2-652 8652 email:cic Thai@philips.com Africa MOROCCO Philips Electronique Maroc 304,BD Mohamed V Casablanca...
  • Page 132 Consumer Information Centers file:///D|/EDFU/crt_19_6/edoc/english/warranty/WARCIC.HTM (12 of 12)2005-08-10 ¤U¤È 01:04:24...

  • Page 133: Protect Your Investment

    Year Mail This Card Today To Get The Most From Your Purchase! ❏ No, I do not want to receive personalized offers about Philips products or other information from Philips in the future. 3135 015 07803 WARRANTY VERIFICATION OWNER CONFIRMATION MODEL REGISTRATION w w w .

  • Page 134: Warranty Registration Card

    PHILIPS Warranty Card 8/16/02 12:38 PM Page 2 !1375415338! 13754-1533 DEPOSIT 1533 Promptly! Open Please MATERIAL TIME-DATED STAMP CLASS FIRST APPLY PLEASE IMPORTANT Warranty Registration Card RETURN THE ATTACHED CARD WITHIN TEN DAYS TO ENSURE YOUR: ✓ Warranty Verification ✓ Owner Confirmation See Inside For ✓...

This manual is also suitable for:

109b65/05109b60109b60-27b109b63109b65109b65-27b ... Show all

Table of Contents