Installing your Monitor
1.
D-Sub Port - Attach the D-Sub connector that comes with your monitor here.
Other end connects to your PC.
2.
Power in - Attach power cable here.
3.
USB Port - Attach your USB Upstream cable here. Connect the other end to
your USB hub or your PC's USB connector. (Not available on all models.)
4.
BNC Connectors - Attach the connectors here to get the best video
performance from your monitor.
file:///G|/manual/english/109P/install/install.htm (3 of 3) [10/16/1999 6:32:28 AM]
RETURN TO TOP OF THE PAGE